[youtube]https://youtu.be/bVRjNfnxJQQ[/youtube]
Ho scaricato l'immagine che si trova in rete e messa su microSD, i joystyck della plancia non fungano, quasi sicuramente si dovrà installare i drive, le roms non ci sono e per trasferirli uso sempre il solito metodo con winscp, e anche se utente PI è proprietario delle cartelle roms mi da l'errore dell'immagine allegata.
Benvenuto Ospite,
per utilizzare il Forum ed avere accesso a tutte le sezioni e poter aprire un tuo Topic, rispondere nelle varie discussioni, mandare o ricevere Messaggi Privati devi seguire pochi passaggi:
Leggi il nostro Regolamento -> PREMI QUI <-
Segui il link su come Iscriversi -> PREMI QUI <-
Ricordati di aggiornare l'Avatar usando una immagine che ti distingua nel Forum
per utilizzare il Forum ed avere accesso a tutte le sezioni e poter aprire un tuo Topic, rispondere nelle varie discussioni, mandare o ricevere Messaggi Privati devi seguire pochi passaggi:
Leggi il nostro Regolamento -> PREMI QUI <-
Segui il link su come Iscriversi -> PREMI QUI <-
Ricordati di aggiornare l'Avatar usando una immagine che ti distingua nel Forum
[Raspberry] attract mode
Moderatore: Moderatore Raspberry
-
giovannidlc
- Cab-dipendente
- Messaggi: 771
- Iscritto il: 14/06/2015, 1:39
- Medaglie: 1
- Città: livorno
- Grazie Ricevuti: 4 volte
- Contatta:
[Raspberry] attract mode
Non hai i permessi necessari per visualizzare i file allegati in questo messaggio.
-
giovannidlc
- Cab-dipendente
- Messaggi: 771
- Iscritto il: 14/06/2015, 1:39
- Medaglie: 1
- Città: livorno
- Grazie Ricevuti: 4 volte
- Contatta:
Re: [Raspberry] attract mode
Forse non hai i permessi di scrittura prova a dare chmod 777 sulla cartella
-
giovannidlc
- Cab-dipendente
- Messaggi: 771
- Iscritto il: 14/06/2015, 1:39
- Medaglie: 1
- Città: livorno
- Grazie Ricevuti: 4 volte
- Contatta:
Re: [Raspberry] attract mode
i permessi sono ok, credo si un problema di spazio su sd, DOvrei espandere il FileSystem ma non trovo il raspi-config.
-
giovannidlc
- Cab-dipendente
- Messaggi: 771
- Iscritto il: 14/06/2015, 1:39
- Medaglie: 1
- Città: livorno
- Grazie Ricevuti: 4 volte
- Contatta:
Re: [Raspberry] attract mode
Infatti, dal menu di Attrack mode sono andato su emulationstation e dal li sul menu retropie e raspy-config, espanso filesystem e adesso le rom le ho messe , non si vedono ma ci sono boh
Re: [Raspberry] attract mode
Vedi che attract mode per vedere le rom le devi importante con il comando - b se non erro, basta che guardi l'help del comando
-
giovannidlc
- Cab-dipendente
- Messaggi: 771
- Iscritto il: 14/06/2015, 1:39
- Medaglie: 1
- Città: livorno
- Grazie Ricevuti: 4 volte
- Contatta:
Re: [Raspberry] attract mode
era solo problema di espansione del file system.
Si inizia a vedere qualcosa .....................
Si inizia a vedere qualcosa .....................
Non hai i permessi necessari per visualizzare i file allegati in questo messaggio.
Re: [Raspberry] attract mode
non male! ma per vedere le anteprime dei giochi bisogna mettere dei file aggiuntivi oppure basta caricare le rom ? in piu non capisco se è come emulationstation che i giochi sono divisi per emulatore oppure se sono in ordine alfabetico tutti assieme e ll'emulatore viene evidenziato solo nel marquee del cabinato che c'è a video..cmq seguo
-
giovannidlc
- Cab-dipendente
- Messaggi: 771
- Iscritto il: 14/06/2015, 1:39
- Medaglie: 1
- Città: livorno
- Grazie Ricevuti: 4 volte
- Contatta:
Re: [Raspberry] attract mode
pazienta loredebby ............
Altro scoglio (cit. Schettino)
installato driver joystyck seguendo la bibbia/guida di devil78 viewtopic.php?f=55&t=22809
ma da i joystick della plancia nessun segno di vita ...........
Altro scoglio (cit. Schettino)
installato driver joystyck seguendo la bibbia/guida di devil78 viewtopic.php?f=55&t=22809
ma da i joystick della plancia nessun segno di vita ...........
Re: [Raspberry] attract mode
tranquillo era pura curiosità 
avevo gia visto su youtube dei video con attract mode ed in effetti quelli in cui si vedeva anche il raspberry avevano tutti collegato dei joystick usb...magari ci sarà qualche cavolata da "scoprire" tipo quella dell'espand filesystem per far andare i tasti collegati alla gpio..in alternativa una xin-mo da testare non ce l'hai?-
giovannidlc
- Cab-dipendente
- Messaggi: 771
- Iscritto il: 14/06/2015, 1:39
- Medaglie: 1
- Città: livorno
- Grazie Ricevuti: 4 volte
- Contatta:
Re: [Raspberry] attract mode
Questi i passaggi seguiti:
Installazione del Driver GPIO
Premessa:
Il driver è compatibile per entrambi le soluzioni e, nonostante sia possibile procedere all'installazione manuale, procederemo seguendo il metodo automatico che funziona sempre. Questa procedura può essere eseguita sia da locale (dal raspberry stesso) che da Remoto via SSH. Procediamo.
Colleghiamo la raspberry in rete, via Lan o Wifi.
Se Operiamo da locale, premiamo F4, poi spazio, per uscire dal EmulationStation. Altrimenti, se operiamo da remoto avviamo la connessone SSH.
Creamo una cartella che chiameremo mkjoystick:
CODICE: SELEZIONA TUTTO
mkdir mkjoystick
Spostiamoci al suo interno:
CODICE: SELEZIONA TUTTO
cd mkjoystick
Scarichiamo l'installer del driver dal sito di digitalLumberjak:
CODICE: SELEZIONA TUTTO
wget https://github.com/digitalLumberjack/mk ... install.sh
e aspettiamo che finisca.
Rendiamo eseguibile il file scaricato:
CODICE: SELEZIONA TUTTO
chmod +x install.sh
A questo punto, bisogna aggiornare il sistema e scaricare i sorgenti del Kernel ed i moduli DMKS, per farlo basta lanciare il tool scaricato e avviarlo con l'ozione updatesystem, tranquilli è più semplice farlo che dirlo
Aggiorniamo il sistema e ed installiamo i sorgenti del kernel:
CODICE: SELEZIONA TUTTO
sudo sh ./install.sh updatesystem
A processo finito, (5 min) occorre ravviare il sistema, facciamolo così:
CODICE: SELEZIONA TUTTO
sudo reboot
A Questo Punto accertiamoci di essere nelle condizioni del Punto 1 e 2 e proseguiamo ad installare il driver.
Ripetiamo il punto 3, ovvero spostiamoci nella cartella del Driver:
CODICE: SELEZIONA TUTTO
cd mkjoystick
Lanciamo l'installer, stavolta senza opzioni, e attendiamo che il processo si concluda:
CODICE: SELEZIONA TUTTO
sudo sh ./install.sh
OTTIMO ABBIAMO INSTSLLATO IL DRIVER
PER CHI USA RETROPIE 3.4 O VERSIONI SUPERIORI
Premessa:
Raspbian è stato aggiornato alla versione Jassye di Debian dalla quale deriva, RetroPie, di conseguenza, ha ereditato tutte le modifiche appartate alla distro madre dalla quale dipende.
Nonostante abbia cercato, più volte, al team di sviluppo di suggerirmi una soluzione efficace per far avviare il driver al boot, non ho ricevuto nessuna risposta. Allora, Armato di Buona Pazienza, sono andato
a leggere un po di documentazione di Raspbian per cercare di capire come ragionasse il sistema in fase di boot al fine di capirci qualcosa e porre fine a questo, apparentemente, insormontabile problema. Devo dire che sono riuscito ad ottenere
il risultato sperato e, finalmente, il Driver GPIO, viene caricato automaticamente al boot del nostro Retropie 3.4 - 3.5!
PROCEDIAMO
Avviamo l'editor di testo che punti direttamente al file del driver da caricare:
CODICE: SELEZIONA TUTTO
sudo nano /etc/modules-load.d/modules.conf
Aggiungiamo questa riga
CODICE: SELEZIONA TUTTO
mk_arcade_joystick_rpi
Premiamo CTRL+o per salvare il file.
Premiamo CTRL+x per uscire dall'editor.
Avviamo l'editor di testo che punti direttamente al file di configurazione delle opzioni del driver:
CODICE: SELEZIONA TUTTO
sudo nano /etc/modprobe.d/mk_arcade_joystick_rpi.conf
Aggiungiamo questa riga se abbiamo UN solo Joystick:
CODICE: SELEZIONA TUTTO
options mk_arcade_joystick_rpi map=1
Oppure questa se abbiamo DUE Joystick:
CODICE: SELEZIONA TUTTO
options mk_arcade_joystick_rpi map=1,2
Premiamo CTRL+o per salvare il file.
Premiamo CTRL+x per uscire dall'editor.
BENISSIMO AVETE UNA PIATTAFORMA ARCADE BASATA SU RASPBERRY PI FUNZIONALE
Installazione del Driver GPIO
Premessa:
Il driver è compatibile per entrambi le soluzioni e, nonostante sia possibile procedere all'installazione manuale, procederemo seguendo il metodo automatico che funziona sempre. Questa procedura può essere eseguita sia da locale (dal raspberry stesso) che da Remoto via SSH. Procediamo.
Colleghiamo la raspberry in rete, via Lan o Wifi.
Se Operiamo da locale, premiamo F4, poi spazio, per uscire dal EmulationStation. Altrimenti, se operiamo da remoto avviamo la connessone SSH.
Creamo una cartella che chiameremo mkjoystick:
CODICE: SELEZIONA TUTTO
mkdir mkjoystick
Spostiamoci al suo interno:
CODICE: SELEZIONA TUTTO
cd mkjoystick
Scarichiamo l'installer del driver dal sito di digitalLumberjak:
CODICE: SELEZIONA TUTTO
wget https://github.com/digitalLumberjack/mk ... install.sh
e aspettiamo che finisca.
Rendiamo eseguibile il file scaricato:
CODICE: SELEZIONA TUTTO
chmod +x install.sh
A questo punto, bisogna aggiornare il sistema e scaricare i sorgenti del Kernel ed i moduli DMKS, per farlo basta lanciare il tool scaricato e avviarlo con l'ozione updatesystem, tranquilli è più semplice farlo che dirlo
Aggiorniamo il sistema e ed installiamo i sorgenti del kernel:
CODICE: SELEZIONA TUTTO
sudo sh ./install.sh updatesystem
A processo finito, (5 min) occorre ravviare il sistema, facciamolo così:
CODICE: SELEZIONA TUTTO
sudo reboot
A Questo Punto accertiamoci di essere nelle condizioni del Punto 1 e 2 e proseguiamo ad installare il driver.
Ripetiamo il punto 3, ovvero spostiamoci nella cartella del Driver:
CODICE: SELEZIONA TUTTO
cd mkjoystick
Lanciamo l'installer, stavolta senza opzioni, e attendiamo che il processo si concluda:
CODICE: SELEZIONA TUTTO
sudo sh ./install.sh
OTTIMO ABBIAMO INSTSLLATO IL DRIVER
PER CHI USA RETROPIE 3.4 O VERSIONI SUPERIORI
Premessa:
Raspbian è stato aggiornato alla versione Jassye di Debian dalla quale deriva, RetroPie, di conseguenza, ha ereditato tutte le modifiche appartate alla distro madre dalla quale dipende.
Nonostante abbia cercato, più volte, al team di sviluppo di suggerirmi una soluzione efficace per far avviare il driver al boot, non ho ricevuto nessuna risposta. Allora, Armato di Buona Pazienza, sono andato
a leggere un po di documentazione di Raspbian per cercare di capire come ragionasse il sistema in fase di boot al fine di capirci qualcosa e porre fine a questo, apparentemente, insormontabile problema. Devo dire che sono riuscito ad ottenere
il risultato sperato e, finalmente, il Driver GPIO, viene caricato automaticamente al boot del nostro Retropie 3.4 - 3.5!
PROCEDIAMO
Avviamo l'editor di testo che punti direttamente al file del driver da caricare:
CODICE: SELEZIONA TUTTO
sudo nano /etc/modules-load.d/modules.conf
Aggiungiamo questa riga
CODICE: SELEZIONA TUTTO
mk_arcade_joystick_rpi
Premiamo CTRL+o per salvare il file.
Premiamo CTRL+x per uscire dall'editor.
Avviamo l'editor di testo che punti direttamente al file di configurazione delle opzioni del driver:
CODICE: SELEZIONA TUTTO
sudo nano /etc/modprobe.d/mk_arcade_joystick_rpi.conf
Aggiungiamo questa riga se abbiamo UN solo Joystick:
CODICE: SELEZIONA TUTTO
options mk_arcade_joystick_rpi map=1
Oppure questa se abbiamo DUE Joystick:
CODICE: SELEZIONA TUTTO
options mk_arcade_joystick_rpi map=1,2
Premiamo CTRL+o per salvare il file.
Premiamo CTRL+x per uscire dall'editor.
BENISSIMO AVETE UNA PIATTAFORMA ARCADE BASATA SU RASPBERRY PI FUNZIONALE
Re: [Raspberry] attract mode
è la parte della guida di devil relativa all'installazione dei tasti sulla gpio....una domanda ma l'installazione va a buon fine oppure ti da qualche errore??? xke ultimamente qua sul forum in tanti hanno riscontrato dei problemi riguardanti le sorgenti kernel...non so se puo essere quello il problema
-
giovannidlc
- Cab-dipendente
- Messaggi: 771
- Iscritto il: 14/06/2015, 1:39
- Medaglie: 1
- Città: livorno
- Grazie Ricevuti: 4 volte
- Contatta:
Re: [Raspberry] attract mode
questa la sequenza dell'installazione l'ho fatta 2 volte, la prima non avevo prestato attenzione e infatti sono presenti degli errori, ma x me è algebra.
pi@retropie:~/mkjoystick $ sudo sh ./install.sh
Installing required dependencies
Reading package lists... Done
Building dependency tree
Reading state information... Done
cpp-4.7 is already the newest version.
dkms is already the newest version.
gcc-4.7 is already the newest version.
git is already the newest version.
joystick is already the newest version.
The following packages were automatically installed and are no longer required:
libgssapi3-heimdal libheimntlm0-heimdal libkdc2-heimdal
Use 'apt-get autoremove' to remove them.
0 upgraded, 0 newly installed, 0 to remove and 5 not upgraded.
Downloading current kernel headers
--2016-05-31 09:27:49-- http://www.niksula.hut.fi/~mhiienka/Rpi ... _armhf.deb
Resolving www.niksula.hut.fi (www.niksula.hut.fi)... 130.233.43.7, 2001:708:20:e 337:8
fedd:f36a
Connecting to www.niksula.hut.fi (www.niksula.hut.fi)|130.233.43.7|:80... connec ted.
HTTP request sent, awaiting response... 302 Moved Temporarily
Location: https://www.niksula.hut.fi/~mhiienka/Rp ... inux-heade rs-4.4.11-v7+_4.4.11-v7+-2_armhf.deb [following]
--2016-05-31 09:27:49-- https://www.niksula.hut.fi/~mhiienka/Rpi/linux-headers- rpi/linux-headers-4.4.11-v7+_4.4.11-v7+-2_armhf.deb
Connecting to www.niksula.hut.fi (www.niksula.hut.fi)|130.233.43.7|:443... conne cted.
HTTP request sent, awaiting response... 200 OK
Length: 9552762 (9.1M) [application/octet-stream]
Saving to: ‘linux-headers-4.4.11-v7+_4.4.11-v7+-2_armhf.deb’
linux-headers-4.4.1 100%[=====================>] 9.11M 4.78MB/s in 1.9s
2016-05-31 09:27:52 (4.78 MB/s) - ‘linux-headers-4.4.11-v7+_4.4.11-v7+-2_armhf.d eb’ saved [9552762/9552762]
Installing current kernel headers
(Reading database ... 86359 files and directories currently installed.)
Preparing to unpack linux-headers-4.4.11-v7+_4.4.11-v7+-2_armhf.deb ...
make: Entering directory '/usr/src/linux-headers-4.4.11-v7+'
CLEAN .
scripts/Makefile.clean:14: drivers/gpu/drm/nouveau/Makefile: No such file or dir ectory
make[4]: *** No rule to make target 'drivers/gpu/drm/nouveau/Makefile'. Stop.
scripts/Makefile.clean:86: recipe for target 'drivers/gpu/drm/nouveau' failed
make[3]: [drivers/gpu/drm/nouveau] Error 2 (ignored)
scripts/Makefile.clean:14: drivers/infiniband/ulp/srp/Makefile: No such file or directory
make[4]: *** No rule to make target 'drivers/infiniband/ulp/srp/Makefile'. Stop .
scripts/Makefile.clean:86: recipe for target 'drivers/infiniband/ulp/srp' failed
make[3]: [drivers/infiniband/ulp/srp] Error 2 (ignored)
scripts/Makefile.clean:14: drivers/scsi/cxgbi/cxgb3i/Makefile: No such file or d irectory
make[4]: *** No rule to make target 'drivers/scsi/cxgbi/cxgb3i/Makefile'. Stop.
scripts/Makefile.clean:86: recipe for target 'drivers/scsi/cxgbi/cxgb3i' failed
make[3]: [drivers/scsi/cxgbi/cxgb3i] Error 2 (ignored)
scripts/Makefile.clean:14: drivers/scsi/cxgbi/cxgb4i/Makefile: No such file or d irectory
make[4]: *** No rule to make target 'drivers/scsi/cxgbi/cxgb4i/Makefile'. Stop.
scripts/Makefile.clean:86: recipe for target 'drivers/scsi/cxgbi/cxgb4i' failed
make[3]: [drivers/scsi/cxgbi/cxgb4i] Error 2 (ignored)
scripts/Makefile.clean:14: drivers/scsi/osd/Makefile: No such file or directory
make[3]: *** No rule to make target 'drivers/scsi/osd/Makefile'. Stop.
scripts/Makefile.clean:86: recipe for target 'drivers/scsi/osd' failed
make[2]: [drivers/scsi/osd] Error 2 (ignored)
scripts/Makefile.clean:14: drivers/staging/rdma/amso1100/Makefile: No such file or directory
make[4]: *** No rule to make target 'drivers/staging/rdma/amso1100/Makefile'. S top.
scripts/Makefile.clean:86: recipe for target 'drivers/staging/rdma/amso1100' fai led
make[3]: [drivers/staging/rdma/amso1100] Error 2 (ignored)
scripts/Makefile.clean:14: drivers/usb/host/whci/Makefile: No such file or direc tory
make[4]: *** No rule to make target 'drivers/usb/host/whci/Makefile'. Stop.
scripts/Makefile.clean:86: recipe for target 'drivers/usb/host/whci' failed
make[3]: [drivers/usb/host/whci] Error 2 (ignored)
scripts/Makefile.clean:14: fs/exofs/Makefile: No such file or directory
make[2]: *** No rule to make target 'fs/exofs/Makefile'. Stop.
scripts/Makefile.clean:86: recipe for target 'fs/exofs' failed
make[1]: [fs/exofs] Error 2 (ignored)
fs/hostfs/Makefile:11: arch/um/scripts/Makefile.rules: No such file or directory
make[2]: *** No rule to make target 'arch/um/scripts/Makefile.rules'. Stop.
scripts/Makefile.clean:86: recipe for target 'fs/hostfs' failed
make[1]: [fs/hostfs] Error 2 (ignored)
scripts/Makefile.clean:14: fs/nfs/objlayout/Makefile: No such file or directory
make[3]: *** No rule to make target 'fs/nfs/objlayout/Makefile'. Stop.
scripts/Makefile.clean:86: recipe for target 'fs/nfs/objlayout' failed
make[2]: [fs/nfs/objlayout] Error 2 (ignored)
CLEAN .tmp_versions
ls: cannot access ./Documentation/DocBook/media/*.b64: No such file or directory
CLEAN scripts/basic
CLEAN scripts/dtc
CLEAN scripts/genksyms
CLEAN scripts/kconfig
CLEAN include/config include/generated arch/arm/include/generated
CLEAN .config Module.symvers
make: Leaving directory '/usr/src/linux-headers-4.4.11-v7+'
Unpacking linux-headers-4.4.11-v7+ (4.4.11-v7+-2) over (4.4.11-v7+-2) ...
Setting up linux-headers-4.4.11-v7+ (4.4.11-v7+-2) ...
make: Entering directory '/usr/src/linux-headers-4.4.11-v7+'
HOSTCC scripts/basic/fixdep
HOSTCC scripts/basic/bin2c
HOSTCC scripts/kconfig/conf.o
HOSTCC scripts/kconfig/zconf.tab.o
HOSTLD scripts/kconfig/conf
*** Default configuration is based on 'bcm2709_defconfig'
#
# configuration written to .config
#
make: Leaving directory '/usr/src/linux-headers-4.4.11-v7+'
make: Entering directory '/usr/src/linux-headers-4.4.11-v7+'
scripts/kconfig/conf --silentoldconfig Kconfig
CHK include/config/kernel.release
UPD include/config/kernel.release
WRAP arch/arm/include/generated/asm/bitsperlong.h
WRAP arch/arm/include/generated/asm/cputime.h
WRAP arch/arm/include/generated/asm/current.h
WRAP arch/arm/include/generated/asm/emergency-restart.h
WRAP arch/arm/include/generated/asm/errno.h
WRAP arch/arm/include/generated/asm/exec.h
WRAP arch/arm/include/generated/asm/ioctl.h
WRAP arch/arm/include/generated/asm/ipcbuf.h
WRAP arch/arm/include/generated/asm/irq_regs.h
WRAP arch/arm/include/generated/asm/kdebug.h
WRAP arch/arm/include/generated/asm/local.h
WRAP arch/arm/include/generated/asm/local64.h
WRAP arch/arm/include/generated/asm/mm-arch-hooks.h
WRAP arch/arm/include/generated/asm/msgbuf.h
WRAP arch/arm/include/generated/asm/msi.h
WRAP arch/arm/include/generated/asm/param.h
WRAP arch/arm/include/generated/asm/parport.h
WRAP arch/arm/include/generated/asm/poll.h
WRAP arch/arm/include/generated/asm/preempt.h
WRAP arch/arm/include/generated/asm/resource.h
WRAP arch/arm/include/generated/asm/rwsem.h
WRAP arch/arm/include/generated/asm/seccomp.h
WRAP arch/arm/include/generated/asm/sections.h
WRAP arch/arm/include/generated/asm/segment.h
WRAP arch/arm/include/generated/asm/sembuf.h
WRAP arch/arm/include/generated/asm/serial.h
WRAP arch/arm/include/generated/asm/shmbuf.h
WRAP arch/arm/include/generated/asm/siginfo.h
WRAP arch/arm/include/generated/asm/simd.h
WRAP arch/arm/include/generated/asm/sizes.h
WRAP arch/arm/include/generated/asm/socket.h
WRAP arch/arm/include/generated/asm/sockios.h
WRAP arch/arm/include/generated/asm/termbits.h
WRAP arch/arm/include/generated/asm/termios.h
WRAP arch/arm/include/generated/asm/timex.h
WRAP arch/arm/include/generated/asm/trace_clock.h
WRAP arch/arm/include/generated/asm/unaligned.h
CHK include/generated/uapi/linux/version.h
UPD include/generated/uapi/linux/version.h
CHK include/generated/utsrelease.h
UPD include/generated/utsrelease.h
Generating include/generated/mach-types.h
CC kernel/bounds.s
CHK include/generated/bounds.h
UPD include/generated/bounds.h
make[1]: *** No rule to make target 'kernel/time/timeconst.bc', needed by 'include/generated/timeconst.h'. Stop.
Makefile:986: recipe for target 'prepare0' failed
make: *** [prepare0] Error 2
make: Leaving directory '/usr/src/linux-headers-4.4.11-v7+'
------------------------------
Deleting module version: 0.1.4
completely from the DKMS tree.
------------------------------
Done.
Loading new mk_arcade_joystick_rpi-0.1.4 DKMS files...
First Installation: checking all kernels...
It is likely that 4.4.11-v7+ belongs to a chroot's host
Building for architecture armv7l
Building initial module for 4.4.11-v7+
Error! Bad return status for module build on kernel: 4.4.11-v7+ (armv7l)
Consult /var/lib/dkms/mk_arcade_joystick_rpi/0.1.4/build/make.log for more information.
Downloading mk_arcade_joystick_rpi 0.1.4
--2016-05-31 09:31:52-- https://github.com/digitalLumberjack/mk ... -0.1.4.deb
Resolving github.com (github.com)... 192.30.252.128
Connecting to github.com (github.com)|192.30.252.128|:443... connected.
HTTP request sent, awaiting response... 301 Moved Permanently
Location: https://github.com/recalbox/mk_arcade_j ... -0.1.4.deb [following]
--2016-05-31 09:31:52-- https://github.com/recalbox/mk_arcade_j ... -0.1.4.deb
Reusing existing connection to github.com:443.
HTTP request sent, awaiting response... 302 Found
Location: https://github-cloud.s3.amazonaws.com/r ... tet-stream [following]
--2016-05-31 09:31:52-- https://github-cloud.s3.amazonaws.com/r ... tet-stream
Resolving github-cloud.s3.amazonaws.com (github-cloud.s3.amazonaws.com)... 54.231.114.219
Connecting to github-cloud.s3.amazonaws.com (github-cloud.s3.amazonaws.com)|54.231.114.219|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 14908 (15K) [application/octet-stream]
Saving to: ‘mk-arcade-joystick-rpi-0.1.4.deb.1’
mk-arcade-joystick-rpi-0.1.4. 100%[================================================>] 14.56K --.-KB/s in 0.1s
2016-05-31 09:31:53 (124 KB/s) - ‘mk-arcade-joystick-rpi-0.1.4.deb.1’ saved [14908/14908]
Installing mk_arcade_joystick_rpi 0.1.4
(Reading database ... 86359 files and directories currently installed.)
Preparing to unpack mk-arcade-joystick-rpi-0.1.4.deb ...
------------------------------
Deleting module version: 0.1.4
completely from the DKMS tree.
------------------------------
Done.
Unpacking mk-arcade-joystick-rpi-dkms (0.1.4) over (0.1.4) ...
Setting up mk-arcade-joystick-rpi-dkms (0.1.4) ...
Loading new mk_arcade_joystick_rpi-0.1.4 DKMS files...
First Installation: checking all kernels...
It is likely that 4.4.11-v7+ belongs to a chroot's host
Building for architecture armv7l
Building initial module for 4.4.11-v7+
Error! Bad return status for module build on kernel: 4.4.11-v7+ (armv7l)
Consult /var/lib/dkms/mk_arcade_joystick_rpi/0.1.4/build/make.log for more information.
Installation OK
Load the module with 'sudo modprobe mk_arcade_joystick_rpi map=1' for 1 joystick
or with 'sudo modprobe mk_arcade_joystick_rpi map=1,2' for 2 joysticks
See https://github.com/digitalLumberjack/mk ... the-driver for more details
pi@retropie:~/mkjoystick $ sudo sh ./install.sh
Installing required dependencies
Reading package lists... Done
Building dependency tree
Reading state information... Done
cpp-4.7 is already the newest version.
dkms is already the newest version.
gcc-4.7 is already the newest version.
git is already the newest version.
joystick is already the newest version.
The following packages were automatically installed and are no longer required:
libgssapi3-heimdal libheimntlm0-heimdal libkdc2-heimdal
Use 'apt-get autoremove' to remove them.
0 upgraded, 0 newly installed, 0 to remove and 5 not upgraded.
Downloading current kernel headers
--2016-05-31 09:27:49-- http://www.niksula.hut.fi/~mhiienka/Rpi ... _armhf.deb
Resolving www.niksula.hut.fi (www.niksula.hut.fi)... 130.233.43.7, 2001:708:20:e 337:8
fedd:f36aConnecting to www.niksula.hut.fi (www.niksula.hut.fi)|130.233.43.7|:80... connec ted.
HTTP request sent, awaiting response... 302 Moved Temporarily
Location: https://www.niksula.hut.fi/~mhiienka/Rp ... inux-heade rs-4.4.11-v7+_4.4.11-v7+-2_armhf.deb [following]
--2016-05-31 09:27:49-- https://www.niksula.hut.fi/~mhiienka/Rpi/linux-headers- rpi/linux-headers-4.4.11-v7+_4.4.11-v7+-2_armhf.deb
Connecting to www.niksula.hut.fi (www.niksula.hut.fi)|130.233.43.7|:443... conne cted.
HTTP request sent, awaiting response... 200 OK
Length: 9552762 (9.1M) [application/octet-stream]
Saving to: ‘linux-headers-4.4.11-v7+_4.4.11-v7+-2_armhf.deb’
linux-headers-4.4.1 100%[=====================>] 9.11M 4.78MB/s in 1.9s
2016-05-31 09:27:52 (4.78 MB/s) - ‘linux-headers-4.4.11-v7+_4.4.11-v7+-2_armhf.d eb’ saved [9552762/9552762]
Installing current kernel headers
(Reading database ... 86359 files and directories currently installed.)
Preparing to unpack linux-headers-4.4.11-v7+_4.4.11-v7+-2_armhf.deb ...
make: Entering directory '/usr/src/linux-headers-4.4.11-v7+'
CLEAN .
scripts/Makefile.clean:14: drivers/gpu/drm/nouveau/Makefile: No such file or dir ectory
make[4]: *** No rule to make target 'drivers/gpu/drm/nouveau/Makefile'. Stop.
scripts/Makefile.clean:86: recipe for target 'drivers/gpu/drm/nouveau' failed
make[3]: [drivers/gpu/drm/nouveau] Error 2 (ignored)
scripts/Makefile.clean:14: drivers/infiniband/ulp/srp/Makefile: No such file or directory
make[4]: *** No rule to make target 'drivers/infiniband/ulp/srp/Makefile'. Stop .
scripts/Makefile.clean:86: recipe for target 'drivers/infiniband/ulp/srp' failed
make[3]: [drivers/infiniband/ulp/srp] Error 2 (ignored)
scripts/Makefile.clean:14: drivers/scsi/cxgbi/cxgb3i/Makefile: No such file or d irectory
make[4]: *** No rule to make target 'drivers/scsi/cxgbi/cxgb3i/Makefile'. Stop.
scripts/Makefile.clean:86: recipe for target 'drivers/scsi/cxgbi/cxgb3i' failed
make[3]: [drivers/scsi/cxgbi/cxgb3i] Error 2 (ignored)
scripts/Makefile.clean:14: drivers/scsi/cxgbi/cxgb4i/Makefile: No such file or d irectory
make[4]: *** No rule to make target 'drivers/scsi/cxgbi/cxgb4i/Makefile'. Stop.
scripts/Makefile.clean:86: recipe for target 'drivers/scsi/cxgbi/cxgb4i' failed
make[3]: [drivers/scsi/cxgbi/cxgb4i] Error 2 (ignored)
scripts/Makefile.clean:14: drivers/scsi/osd/Makefile: No such file or directory
make[3]: *** No rule to make target 'drivers/scsi/osd/Makefile'. Stop.
scripts/Makefile.clean:86: recipe for target 'drivers/scsi/osd' failed
make[2]: [drivers/scsi/osd] Error 2 (ignored)
scripts/Makefile.clean:14: drivers/staging/rdma/amso1100/Makefile: No such file or directory
make[4]: *** No rule to make target 'drivers/staging/rdma/amso1100/Makefile'. S top.
scripts/Makefile.clean:86: recipe for target 'drivers/staging/rdma/amso1100' fai led
make[3]: [drivers/staging/rdma/amso1100] Error 2 (ignored)
scripts/Makefile.clean:14: drivers/usb/host/whci/Makefile: No such file or direc tory
make[4]: *** No rule to make target 'drivers/usb/host/whci/Makefile'. Stop.
scripts/Makefile.clean:86: recipe for target 'drivers/usb/host/whci' failed
make[3]: [drivers/usb/host/whci] Error 2 (ignored)
scripts/Makefile.clean:14: fs/exofs/Makefile: No such file or directory
make[2]: *** No rule to make target 'fs/exofs/Makefile'. Stop.
scripts/Makefile.clean:86: recipe for target 'fs/exofs' failed
make[1]: [fs/exofs] Error 2 (ignored)
fs/hostfs/Makefile:11: arch/um/scripts/Makefile.rules: No such file or directory
make[2]: *** No rule to make target 'arch/um/scripts/Makefile.rules'. Stop.
scripts/Makefile.clean:86: recipe for target 'fs/hostfs' failed
make[1]: [fs/hostfs] Error 2 (ignored)
scripts/Makefile.clean:14: fs/nfs/objlayout/Makefile: No such file or directory
make[3]: *** No rule to make target 'fs/nfs/objlayout/Makefile'. Stop.
scripts/Makefile.clean:86: recipe for target 'fs/nfs/objlayout' failed
make[2]: [fs/nfs/objlayout] Error 2 (ignored)
CLEAN .tmp_versions
ls: cannot access ./Documentation/DocBook/media/*.b64: No such file or directory
CLEAN scripts/basic
CLEAN scripts/dtc
CLEAN scripts/genksyms
CLEAN scripts/kconfig
CLEAN include/config include/generated arch/arm/include/generated
CLEAN .config Module.symvers
make: Leaving directory '/usr/src/linux-headers-4.4.11-v7+'
Unpacking linux-headers-4.4.11-v7+ (4.4.11-v7+-2) over (4.4.11-v7+-2) ...
Setting up linux-headers-4.4.11-v7+ (4.4.11-v7+-2) ...
make: Entering directory '/usr/src/linux-headers-4.4.11-v7+'
HOSTCC scripts/basic/fixdep
HOSTCC scripts/basic/bin2c
HOSTCC scripts/kconfig/conf.o
HOSTCC scripts/kconfig/zconf.tab.o
HOSTLD scripts/kconfig/conf
*** Default configuration is based on 'bcm2709_defconfig'
#
# configuration written to .config
#
make: Leaving directory '/usr/src/linux-headers-4.4.11-v7+'
make: Entering directory '/usr/src/linux-headers-4.4.11-v7+'
scripts/kconfig/conf --silentoldconfig Kconfig
CHK include/config/kernel.release
UPD include/config/kernel.release
WRAP arch/arm/include/generated/asm/bitsperlong.h
WRAP arch/arm/include/generated/asm/cputime.h
WRAP arch/arm/include/generated/asm/current.h
WRAP arch/arm/include/generated/asm/emergency-restart.h
WRAP arch/arm/include/generated/asm/errno.h
WRAP arch/arm/include/generated/asm/exec.h
WRAP arch/arm/include/generated/asm/ioctl.h
WRAP arch/arm/include/generated/asm/ipcbuf.h
WRAP arch/arm/include/generated/asm/irq_regs.h
WRAP arch/arm/include/generated/asm/kdebug.h
WRAP arch/arm/include/generated/asm/local.h
WRAP arch/arm/include/generated/asm/local64.h
WRAP arch/arm/include/generated/asm/mm-arch-hooks.h
WRAP arch/arm/include/generated/asm/msgbuf.h
WRAP arch/arm/include/generated/asm/msi.h
WRAP arch/arm/include/generated/asm/param.h
WRAP arch/arm/include/generated/asm/parport.h
WRAP arch/arm/include/generated/asm/poll.h
WRAP arch/arm/include/generated/asm/preempt.h
WRAP arch/arm/include/generated/asm/resource.h
WRAP arch/arm/include/generated/asm/rwsem.h
WRAP arch/arm/include/generated/asm/seccomp.h
WRAP arch/arm/include/generated/asm/sections.h
WRAP arch/arm/include/generated/asm/segment.h
WRAP arch/arm/include/generated/asm/sembuf.h
WRAP arch/arm/include/generated/asm/serial.h
WRAP arch/arm/include/generated/asm/shmbuf.h
WRAP arch/arm/include/generated/asm/siginfo.h
WRAP arch/arm/include/generated/asm/simd.h
WRAP arch/arm/include/generated/asm/sizes.h
WRAP arch/arm/include/generated/asm/socket.h
WRAP arch/arm/include/generated/asm/sockios.h
WRAP arch/arm/include/generated/asm/termbits.h
WRAP arch/arm/include/generated/asm/termios.h
WRAP arch/arm/include/generated/asm/timex.h
WRAP arch/arm/include/generated/asm/trace_clock.h
WRAP arch/arm/include/generated/asm/unaligned.h
CHK include/generated/uapi/linux/version.h
UPD include/generated/uapi/linux/version.h
CHK include/generated/utsrelease.h
UPD include/generated/utsrelease.h
Generating include/generated/mach-types.h
CC kernel/bounds.s
CHK include/generated/bounds.h
UPD include/generated/bounds.h
make[1]: *** No rule to make target 'kernel/time/timeconst.bc', needed by 'include/generated/timeconst.h'. Stop.
Makefile:986: recipe for target 'prepare0' failed
make: *** [prepare0] Error 2
make: Leaving directory '/usr/src/linux-headers-4.4.11-v7+'
------------------------------
Deleting module version: 0.1.4
completely from the DKMS tree.
------------------------------
Done.
Loading new mk_arcade_joystick_rpi-0.1.4 DKMS files...
First Installation: checking all kernels...
It is likely that 4.4.11-v7+ belongs to a chroot's host
Building for architecture armv7l
Building initial module for 4.4.11-v7+
Error! Bad return status for module build on kernel: 4.4.11-v7+ (armv7l)
Consult /var/lib/dkms/mk_arcade_joystick_rpi/0.1.4/build/make.log for more information.
Downloading mk_arcade_joystick_rpi 0.1.4
--2016-05-31 09:31:52-- https://github.com/digitalLumberjack/mk ... -0.1.4.deb
Resolving github.com (github.com)... 192.30.252.128
Connecting to github.com (github.com)|192.30.252.128|:443... connected.
HTTP request sent, awaiting response... 301 Moved Permanently
Location: https://github.com/recalbox/mk_arcade_j ... -0.1.4.deb [following]
--2016-05-31 09:31:52-- https://github.com/recalbox/mk_arcade_j ... -0.1.4.deb
Reusing existing connection to github.com:443.
HTTP request sent, awaiting response... 302 Found
Location: https://github-cloud.s3.amazonaws.com/r ... tet-stream [following]
--2016-05-31 09:31:52-- https://github-cloud.s3.amazonaws.com/r ... tet-stream
Resolving github-cloud.s3.amazonaws.com (github-cloud.s3.amazonaws.com)... 54.231.114.219
Connecting to github-cloud.s3.amazonaws.com (github-cloud.s3.amazonaws.com)|54.231.114.219|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 14908 (15K) [application/octet-stream]
Saving to: ‘mk-arcade-joystick-rpi-0.1.4.deb.1’
mk-arcade-joystick-rpi-0.1.4. 100%[================================================>] 14.56K --.-KB/s in 0.1s
2016-05-31 09:31:53 (124 KB/s) - ‘mk-arcade-joystick-rpi-0.1.4.deb.1’ saved [14908/14908]
Installing mk_arcade_joystick_rpi 0.1.4
(Reading database ... 86359 files and directories currently installed.)
Preparing to unpack mk-arcade-joystick-rpi-0.1.4.deb ...
------------------------------
Deleting module version: 0.1.4
completely from the DKMS tree.
------------------------------
Done.
Unpacking mk-arcade-joystick-rpi-dkms (0.1.4) over (0.1.4) ...
Setting up mk-arcade-joystick-rpi-dkms (0.1.4) ...
Loading new mk_arcade_joystick_rpi-0.1.4 DKMS files...
First Installation: checking all kernels...
It is likely that 4.4.11-v7+ belongs to a chroot's host
Building for architecture armv7l
Building initial module for 4.4.11-v7+
Error! Bad return status for module build on kernel: 4.4.11-v7+ (armv7l)
Consult /var/lib/dkms/mk_arcade_joystick_rpi/0.1.4/build/make.log for more information.
Installation OK
Load the module with 'sudo modprobe mk_arcade_joystick_rpi map=1' for 1 joystick
or with 'sudo modprobe mk_arcade_joystick_rpi map=1,2' for 2 joysticks
See https://github.com/digitalLumberjack/mk ... the-driver for more details
Re: [Raspberry] attract mode
prova a ripetere l'installazione saltando il punto 7
"Aggiorniamo il sistema e ed installiamo i sorgenti del kernel:
CODICE: SELEZIONA TUTTO
sudo sh ./install.sh updatesystem"
procedi senza fare l'updatesystem e vedi se risolvi...se funziona a quanto pare c'è un problema di incompatibilità con il kernel 4.4.11
"Aggiorniamo il sistema e ed installiamo i sorgenti del kernel:
CODICE: SELEZIONA TUTTO
sudo sh ./install.sh updatesystem"
procedi senza fare l'updatesystem e vedi se risolvi...se funziona a quanto pare c'è un problema di incompatibilità con il kernel 4.4.11
-
boogs
- Nostalgico
- Messaggi: 488
- Iscritto il: 23/04/2013, 22:50
- Città: Mestre
- Grazie Ricevuti: 2 volte
Re: [Raspberry] attract mode
Mi pare che l'incompatibilità sia confermata dai issue aperti su GitHub
Inviato dal mio iPhone utilizzando Tapatalk
Inviato dal mio iPhone utilizzando Tapatalk
-
giovannidlc
- Cab-dipendente
- Messaggi: 771
- Iscritto il: 14/06/2015, 1:39
- Medaglie: 1
- Città: livorno
- Grazie Ricevuti: 4 volte
- Contatta:
Re: [Raspberry] attract mode
Proverò con questo ........
Non hai i permessi necessari per visualizzare i file allegati in questo messaggio.
-
giovannidlc
- Cab-dipendente
- Messaggi: 771
- Iscritto il: 14/06/2015, 1:39
- Medaglie: 1
- Città: livorno
- Grazie Ricevuti: 4 volte
- Contatta:
-
giovannidlc
- Cab-dipendente
- Messaggi: 771
- Iscritto il: 14/06/2015, 1:39
- Medaglie: 1
- Città: livorno
- Grazie Ricevuti: 4 volte
- Contatta:
Re: [Raspberry] attract mode
loredebby
Riprovato da capo ma saltando, nella sezione installazione driver gpio, il punto
7 Aggiorniamo il sistema e ed installiamo i sorgenti del kernel:
CODICE: SELEZIONA TUTTO
sudo sh ./install.sh updatesystem
e passando direttamente al
punto 10 Lanciamo l'installer, stavolta senza opzioni, e attendiamo che il processo si concluda:
CODICE: SELEZIONA TUTTO
sudo sh ./install.sh
utilizzando il test da ssh nn dava segni di vita ma su emulationstation e attracck-mod .......... funziona !!!
di seguito metto i dettagli dell'installazione, per chi ci capisce possono essere utili:
login as: pi
pi@192.168.1.112's password:
.~~. .~~. Wednesday, 1 June 2016, 1:54:20 pm UTC
'. \ ' ' / .' Linux 4.1.19-v7+ armv7l GNU/Linux
.~ .~~~..~.
: .~.'~'.~. : Filesystem Size Used Avail Use% Mounted on
~ ( ) ( ) ~ /dev/root 29G 21G 7.3G 74% /
( : '~'.~.'~' : ) Uptime.............: 0 days, 00h02m12s
~ .~ ~. ~ Memory.............: 573192kB (Free) / 753136kB (Total)
( | | ) Running Processes..: 95
'~ ~' IP Address.........: 192.168.1.112
*--~-~--* Temperature........: CPU: 46°C/114°F GPU: 45°C/113°F
The RetroPie Project, http://www.petrockblock.com
pi@retropie:~ $ mkdir mkjoystick
pi@retropie:~ $ cd mkjoystick
pi@retropie:~/mkjoystick $ wget https://github.com/digitalLumberjack/mk_arcade_j oystick_rpi/releases/download/v0.1.4/install.sh
--2016-06-01 13:57:46-- https://github.com/digitalLumberjack/mk_arcade_joystick _rpi/releases/download/v0.1.4/install.sh
Resolving github.com (github.com)... 192.30.252.123
Connecting to github.com (github.com)|192.30.252.123|:443... connected.
HTTP request sent, awaiting response... 301 Moved Permanently
Location: https://github.com/recalbox/mk_arcade_j ... download/v 0.1.4/install.sh [following]
--2016-06-01 13:57:47-- https://github.com/recalbox/mk_arcade_joystick_rpi/rele ases/download/v0.1.4/install.sh
Reusing existing connection to github.com:443.
HTTP request sent, awaiting response... 302 Found
Location: https://github-cloud.s3.amazonaws.com/r ... d2c4-b4ef- 11e4-93c7-83cb0772a6ff.sh?X-Amz-Algorithm=AWS4-HMAC-SHA256&X-Amz-Credential=AKIA ISTNZFOVBIJMK3TQ%2F20160601%2Fus-east-1%2Fs3%2Faws4_request&X-Amz-Date=20160601T 135747Z&X-Amz-Expires=300&X-Amz-Signature=1c77584eb403d301a2c337c9b57a2b3aa67a94 33b352e8610d8d9bbff75f721a&X-Amz-SignedHeaders=host&actor_id=0&response-content- disposition=attachment%3B%20filename%3Dinstall.sh&response-content-type=applicat ion%2Foctet-stream [following]
--2016-06-01 13:57:47-- https://github-cloud.s3.amazonaws.com/releases/20679079 /467ed2c4-b4ef-11e4-93c7-83cb0772a6ff.sh?X-Amz-Algorithm=AWS4-HMAC-SHA256&X-Amz- Credential=AKIAISTNZFOVBIJMK3TQ%2F20160601%2Fus-east-1%2Fs3%2Faws4_request&X-Amz -Date=20160601T135747Z&X-Amz-Expires=300&X-Amz-Signature=1c77584eb403d301a2c337c 9b57a2b3aa67a9433b352e8610d8d9bbff75f721a&X-Amz-SignedHeaders=host&actor_id=0&re sponse-content-disposition=attachment%3B%20filename%3Dinstall.sh&response-conten t-type=application%2Foctet-stream
Resolving github-cloud.s3.amazonaws.com (github-cloud.s3.amazonaws.com)... 54.23 1.17.177
Connecting to github-cloud.s3.amazonaws.com (github-cloud.s3.amazonaws.com)|54.2 31.17.177|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 1797 (1.8K) [application/octet-stream]
Saving to: ‘install.sh’
install.sh 100%[=====================>] 1.75K --.-KB/s in 0.001s
2016-06-01 13:57:48 (2.81 MB/s) - ‘install.sh’ saved [1797/1797]
pi@retropie:~/mkjoystick $ chmod +x install.sh
pi@retropie:~/mkjoystick $ sudo sh ./install.sh
Installing required dependencies
Reading package lists... Done
Building dependency tree
Reading state information... Done
git is already the newest version.
joystick is already the newest version.
The following packages were automatically installed and are no longer required:
libgssapi3-heimdal libheimntlm0-heimdal libkdc2-heimdal
Use 'apt-get autoremove' to remove them.
The following extra packages will be installed:
cpp-4.6 firmware-linux-free gcc-4.6 libgcc-4.7-dev libuuid-perl linux-base
linux-headers-3.6-trunk-common linux-headers-3.6-trunk-rpi
linux-image-3.6-trunk-rpi linux-kbuild-3.6
Suggested packages:
gcc-4.6-locales gcc-4.7-locales libmudflap0-4.6-dev gcc-4.6-doc libgcc1-dbg
libgomp1-dbg libquadmath-dbg libmudflap0-dbg libcloog-ppl1 libcloog-ppl0
libppl-c4 libppl12 libppl9 libmudflap0-4.7-dev gcc-4.7-doc libitm1-dbg
libpwl5 linux-doc-3.6 debian-kernel-handbook fdutils
Recommended packages:
linux-headers-686-pae linux-headers-amd64 linux-headers-generic
linux-headers linux-image
The following NEW packages will be installed:
cpp-4.6 cpp-4.7 dkms firmware-linux-free gcc-4.6 gcc-4.7 libgcc-4.7-dev
libuuid-perl linux-base linux-headers-3.6-trunk-common
linux-headers-3.6-trunk-rpi linux-image-3.6-trunk-rpi linux-kbuild-3.6
0 upgraded, 13 newly installed, 0 to remove and 1 not upgraded.
Need to get 30.2 MB of archives.
After this operation, 111 MB of additional disk space will be used.
Get:1 http://mirrordirector.raspbian.org/raspbian/ jessie/main libuuid-perl armh f 0.05-1+b1 [10.0 kB]
Get:2 http://mirrordirector.raspbian.org/raspbian/ jessie/main linux-base all 3. 5 [34.3 kB]
Get:3 http://mirrordirector.raspbian.org/raspbian/ jessie/main linux-image-3.6-t runk-rpi armhf 3.6.9-1~experimental.1+rpi7 [10.0 MB]
Get:4 http://mirrordirector.raspbian.org/raspbian/ jessie/main cpp-4.6 armhf 4.6 .4-5+rpi1 [4,145 kB]
Get:5 http://mirrordirector.raspbian.org/raspbian/ jessie/main cpp-4.7 armhf 4.7 .3-11+rpi1 [3,252 kB]
Get:6 http://mirrordirector.raspbian.org/raspbian/ jessie/main dkms all 2.2.0.3- 2 [70.9 kB]
Get:7 http://mirrordirector.raspbian.org/raspbian/ jessie/main firmware-linux-fr ee all 3.3 [19.1 kB]
Get:8 http://mirrordirector.raspbian.org/raspbian/ jessie/main gcc-4.6 armhf 4.6 .4-5+rpi1 [4,363 kB]
Get:9 http://mirrordirector.raspbian.org/raspbian/ jessie/main libgcc-4.7-dev ar mhf 4.7.3-11+rpi1 [113 kB]
Get:10 http://mirrordirector.raspbian.org/raspbian/ jessie/main gcc-4.7 armhf 4. 7.3-11+rpi1 [3,433 kB]
Get:11 http://mirrordirector.raspbian.org/raspbian/ jessie/main linux-headers-3. 6-trunk-common armhf 3.6.9-1~experimental.1+rpi7 [4,189 kB]
Get:12 http://mirrordirector.raspbian.org/raspbian/ jessie/main linux-kbuild-3.6 armhf 3.6-1~experimental.1+rpi2 [135 kB]
Get:13 http://mirrordirector.raspbian.org/raspbian/ jessie/main linux-headers-3. 6-trunk-rpi armhf 3.6.9-1~experimental.1+rpi7 [414 kB]
Fetched 30.2 MB in 14s (2,059 kB/s)
Preconfiguring packages ...
Selecting previously unselected package libuuid-perl.
(Reading database ... 62842 files and directories currently installed.)
Preparing to unpack .../libuuid-perl_0.05-1+b1_armhf.deb ...
Unpacking libuuid-perl (0.05-1+b1) ...
Selecting previously unselected package linux-base.
Preparing to unpack .../linux-base_3.5_all.deb ...
Unpacking linux-base (3.5) ...
Selecting previously unselected package linux-image-3.6-trunk-rpi.
Preparing to unpack .../linux-image-3.6-trunk-rpi_3.6.9-1~experimental.1+rpi7_ar mhf.deb ...
Unpacking linux-image-3.6-trunk-rpi (3.6.9-1~experimental.1+rpi7) ...
Selecting previously unselected package cpp-4.6.
Preparing to unpack .../cpp-4.6_4.6.4-5+rpi1_armhf.deb ...
Unpacking cpp-4.6 (4.6.4-5+rpi1) ...
Selecting previously unselected package cpp-4.7.
Preparing to unpack .../cpp-4.7_4.7.3-11+rpi1_armhf.deb ...
Unpacking cpp-4.7 (4.7.3-11+rpi1) ...
Selecting previously unselected package dkms.
Preparing to unpack .../dkms_2.2.0.3-2_all.deb ...
Unpacking dkms (2.2.0.3-2) ...
Selecting previously unselected package firmware-linux-free.
Preparing to unpack .../firmware-linux-free_3.3_all.deb ...
Unpacking firmware-linux-free (3.3) ...
Selecting previously unselected package gcc-4.6.
Preparing to unpack .../gcc-4.6_4.6.4-5+rpi1_armhf.deb ...
Unpacking gcc-4.6 (4.6.4-5+rpi1) ...
Selecting previously unselected package libgcc-4.7-dev:armhf.
Preparing to unpack .../libgcc-4.7-dev_4.7.3-11+rpi1_armhf.deb ...
Unpacking libgcc-4.7-dev:armhf (4.7.3-11+rpi1) ...
Selecting previously unselected package gcc-4.7.
Preparing to unpack .../gcc-4.7_4.7.3-11+rpi1_armhf.deb ...
Unpacking gcc-4.7 (4.7.3-11+rpi1) ...
Selecting previously unselected package linux-headers-3.6-trunk-common.
Preparing to unpack .../linux-headers-3.6-trunk-common_3.6.9-1~experimental.1+rp i7_armhf.deb ...
Unpacking linux-headers-3.6-trunk-common (3.6.9-1~experimental.1+rpi7) ...
Selecting previously unselected package linux-kbuild-3.6.
Preparing to unpack .../linux-kbuild-3.6_3.6-1~experimental.1+rpi2_armhf.deb ...
Unpacking linux-kbuild-3.6 (3.6-1~experimental.1+rpi2) ...
Selecting previously unselected package linux-headers-3.6-trunk-rpi.
Preparing to unpack .../linux-headers-3.6-trunk-rpi_3.6.9-1~experimental.1+rpi7_armhf.deb ...
Unpacking linux-headers-3.6-trunk-rpi (3.6.9-1~experimental.1+rpi7) ...
Processing triggers for man-db (2.7.0.2-5) ...
Setting up libuuid-perl (0.05-1+b1) ...
Setting up linux-base (3.5) ...
Setting up linux-image-3.6-trunk-rpi (3.6.9-1~experimental.1+rpi7) ...
Running depmod.
Examining /etc/kernel/postinst.d.
run-parts: executing /etc/kernel/postinst.d/apt-auto-removal 3.6-trunk-rpi /boot/vmlinuz-3.6-trunk-rpi
run-parts: executing /etc/kernel/postinst.d/initramfs-tools 3.6-trunk-rpi /boot/vmlinuz-3.6-trunk-rpi
update-initramfs: Generating /boot/initrd.img-3.6-trunk-rpi
Setting up cpp-4.6 (4.6.4-5+rpi1) ...
Setting up cpp-4.7 (4.7.3-11+rpi1) ...
Setting up dkms (2.2.0.3-2) ...
Setting up firmware-linux-free (3.3) ...
update-initramfs: deferring update (trigger activated)
Setting up gcc-4.6 (4.6.4-5+rpi1) ...
Setting up libgcc-4.7-dev:armhf (4.7.3-11+rpi1) ...
Setting up gcc-4.7 (4.7.3-11+rpi1) ...
Setting up linux-headers-3.6-trunk-common (3.6.9-1~experimental.1+rpi7) ...
Setting up linux-kbuild-3.6 (3.6-1~experimental.1+rpi2) ...
Setting up linux-headers-3.6-trunk-rpi (3.6.9-1~experimental.1+rpi7) ...
Examining /etc/kernel/header_postinst.d.
run-parts: executing /etc/kernel/header_postinst.d/dkms 3.6-trunk-rpi
Processing triggers for initramfs-tools (0.120+deb8u1) ...
ln: failed to create hard link ‘/boot/initrd.img-3.6-trunk-rpi.dpkg-bak’ => ‘/boot/initrd.img-3.6-trunk-rpi’: Operation not
update-initramfs: Generating /boot/initrd.img-3.6-trunk-rpi
Downloading current kernel headers
--2016-06-01 14:03:18-- http://www.niksula.hut.fi/~mhiienka/Rpi ... 9-v7+-2_ar
Resolving www.niksula.hut.fi (www.niksula.hut.fi)... 130.233.43.7, 2001:708:20:e337:8fedd:f36a
Connecting to www.niksula.hut.fi (www.niksula.hut.fi)|130.233.43.7|:80... connected.
HTTP request sent, awaiting response... 302 Moved Temporarily
Location: https://www.niksula.hut.fi/~mhiienka/Rp ... _armhf.deb [follo
--2016-06-01 14:03:18-- https://www.niksula.hut.fi/~mhiienka/Rp ... 19-v7+-2_a
Connecting to www.niksula.hut.fi (www.niksula.hut.fi)|130.233.43.7|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 8923122 (8.5M) [application/octet-stream]
Saving to: ‘linux-headers-4.1.19-v7+_4.1.19-v7+-2_armhf.deb’
linux-headers-4.1.19-v7+_4.1.19-v7+-2_armhf.deb 100%[==========================================================
2016-06-01 14:03:21 (3.60 MB/s) - ‘linux-headers-4.1.19-v7+_4.1.19-v7+-2_armhf.deb’ saved [8923122/8923122]
Installing current kernel headers
Selecting previously unselected package linux-headers-4.1.19-v7+.
(Reading database ... 72064 files and directories currently installed.)
Preparing to unpack linux-headers-4.1.19-v7+_4.1.19-v7+-2_armhf.deb ...
Unpacking linux-headers-4.1.19-v7+ (4.1.19-v7+-2) ...
Setting up linux-headers-4.1.19-v7+ (4.1.19-v7+-2) ...
make: Entering directory '/usr/src/linux-headers-4.1.19-v7+'
HOSTCC scripts/basic/fixdep
HOSTCC scripts/basic/bin2c
HOSTCC scripts/kconfig/conf.o
HOSTCC scripts/kconfig/zconf.tab.o
HOSTLD scripts/kconfig/conf
*** Default configuration is based on 'bcm2709_defconfig'
#
# configuration written to .config
#
make: Leaving directory '/usr/src/linux-headers-4.1.19-v7+'
make: Entering directory '/usr/src/linux-headers-4.1.19-v7+'
scripts/kconfig/conf --silentoldconfig Kconfig
CHK include/config/kernel.release
UPD include/config/kernel.release
WRAP arch/arm/include/generated/asm/bitsperlong.h
WRAP arch/arm/include/generated/asm/cputime.h
WRAP arch/arm/include/generated/asm/current.h
WRAP arch/arm/include/generated/asm/emergency-restart.h
WRAP arch/arm/include/generated/asm/errno.h
WRAP arch/arm/include/generated/asm/exec.h
WRAP arch/arm/include/generated/asm/ioctl.h
WRAP arch/arm/include/generated/asm/ipcbuf.h
WRAP arch/arm/include/generated/asm/irq_regs.h
WRAP arch/arm/include/generated/asm/kdebug.h
WRAP arch/arm/include/generated/asm/local.h
WRAP arch/arm/include/generated/asm/local64.h
WRAP arch/arm/include/generated/asm/mcs_spinlock.h
WRAP arch/arm/include/generated/asm/msgbuf.h
WRAP arch/arm/include/generated/asm/param.h
WRAP arch/arm/include/generated/asm/parport.h
WRAP arch/arm/include/generated/asm/poll.h
WRAP arch/arm/include/generated/asm/preempt.h
WRAP arch/arm/include/generated/asm/resource.h
WRAP arch/arm/include/generated/asm/rwsem.h
WRAP arch/arm/include/generated/asm/scatterlist.h
WRAP arch/arm/include/generated/asm/seccomp.h
WRAP arch/arm/include/generated/asm/sections.h
WRAP arch/arm/include/generated/asm/segment.h
WRAP arch/arm/include/generated/asm/sembuf.h
WRAP arch/arm/include/generated/asm/serial.h
WRAP arch/arm/include/generated/asm/shmbuf.h
WRAP arch/arm/include/generated/asm/siginfo.h
WRAP arch/arm/include/generated/asm/simd.h
WRAP arch/arm/include/generated/asm/sizes.h
WRAP arch/arm/include/generated/asm/socket.h
WRAP arch/arm/include/generated/asm/sockios.h
WRAP arch/arm/include/generated/asm/termbits.h
WRAP arch/arm/include/generated/asm/termios.h
WRAP arch/arm/include/generated/asm/timex.h
WRAP arch/arm/include/generated/asm/trace_clock.h
WRAP arch/arm/include/generated/asm/unaligned.h
CHK include/generated/uapi/linux/version.h
UPD include/generated/uapi/linux/version.h
CHK include/generated/utsrelease.h
UPD include/generated/utsrelease.h
Generating include/generated/mach-types.h
CC kernel/bounds.s
CHK include/generated/bounds.h
UPD include/generated/bounds.h
CC arch/arm/kernel/asm-offsets.s
CHK include/generated/asm-offsets.h
UPD include/generated/asm-offsets.h
CALL scripts/checksyscalls.sh
grep: scripts/../arch/x86/syscalls/syscall_32.tbl: No such file or directory
HOSTCC scripts/dtc/dtc.o
HOSTCC scripts/dtc/flattree.o
HOSTCC scripts/dtc/fstree.o
HOSTCC scripts/dtc/data.o
HOSTCC scripts/dtc/livetree.o
HOSTCC scripts/dtc/treesource.o
HOSTCC scripts/dtc/srcpos.o
HOSTCC scripts/dtc/checks.o
HOSTCC scripts/dtc/util.o
SHIPPED scripts/dtc/dtc-lexer.lex.c
SHIPPED scripts/dtc/dtc-parser.tab.h
HOSTCC scripts/dtc/dtc-lexer.lex.o
SHIPPED scripts/dtc/dtc-parser.tab.c
HOSTCC scripts/dtc/dtc-parser.tab.o
HOSTLD scripts/dtc/dtc
HOSTCC scripts/genksyms/genksyms.o
SHIPPED scripts/genksyms/parse.tab.c
HOSTCC scripts/genksyms/parse.tab.o
SHIPPED scripts/genksyms/lex.lex.c
SHIPPED scripts/genksyms/keywords.hash.c
SHIPPED scripts/genksyms/parse.tab.h
HOSTCC scripts/genksyms/lex.lex.o
HOSTLD scripts/genksyms/genksyms
CC scripts/mod/empty.o
HOSTCC scripts/mod/mk_elfconfig
MKELF scripts/mod/elfconfig.h
HOSTCC scripts/mod/modpost.o
CC scripts/mod/devicetable-offsets.s
GEN scripts/mod/devicetable-offsets.h
HOSTCC scripts/mod/file2alias.o
HOSTCC scripts/mod/sumversion.o
HOSTLD scripts/mod/modpost
HOSTCC scripts/kallsyms
HOSTCC scripts/pnmtologo
HOSTCC scripts/conmakehash
HOSTCC scripts/recordmcount
HOSTCC scripts/sortextable
make: Leaving directory '/usr/src/linux-headers-4.1.19-v7+'
Downloading mk_arcade_joystick_rpi 0.1.4
--2016-06-01 14:07:49-- https://github.com/digitalLumberjack/mk ... arcade-joy
Resolving github.com (github.com)... 192.30.252.120
Connecting to github.com (github.com)|192.30.252.120|:443... connected.
HTTP request sent, awaiting response... 301 Moved Permanently
Location: https://github.com/recalbox/mk_arcade_j ... -0.1.4.deb [fol
--2016-06-01 14:07:49-- https://github.com/recalbox/mk_arcade_j ... ystick-rpi
Reusing existing connection to github.com:443.
HTTP request sent, awaiting response... 302 Found
Location: https://github-cloud.s3.amazonaws.com/r ... tet-stream [following]
--2016-06-01 14:07:50-- https://github-cloud.s3.amazonaws.com/r ... tet-stream
Resolving github-cloud.s3.amazonaws.com (github-cloud.s3.amazonaws.com)... 54.231.32.107
Connecting to github-cloud.s3.amazonaws.com (github-cloud.s3.amazonaws.com)|54.231.32.107|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 14908 (15K) [application/octet-stream]
Saving to: ‘mk-arcade-joystick-rpi-0.1.4.deb’
mk-arcade-joystick-rpi-0.1.4.deb 100%[==========================================================
2016-06-01 14:07:50 (120 KB/s) - ‘mk-arcade-joystick-rpi-0.1.4.deb’ saved [14908/14908]
Installing mk_arcade_joystick_rpi 0.1.4
Selecting previously unselected package mk-arcade-joystick-rpi-dkms.
(Reading database ... 85648 files and directories currently installed.)
Preparing to unpack mk-arcade-joystick-rpi-0.1.4.deb ...
Unpacking mk-arcade-joystick-rpi-dkms (0.1.4) ...
Setting up mk-arcade-joystick-rpi-dkms (0.1.4) ...
Loading new mk_arcade_joystick_rpi-0.1.4 DKMS files...
First Installation: checking all kernels...
It is likely that 4.1.19-v7+ belongs to a chroot's host
Building for architecture armv7l
Building initial module for 4.1.19-v7+
Done.
mk_arcade_joystick_rpi:
Running module version sanity check.
- Original module
- No original module exists within this kernel
- Installation
- Installing to /lib/modules/4.1.19-v7+/updates/dkms/
depmod.....
DKMS: install completed.
Installation OK
Load the module with 'sudo modprobe mk_arcade_joystick_rpi map=1' for 1 joystick
or with 'sudo modprobe mk_arcade_joystick_rpi map=1,2' for 2 joysticks
See https://github.com/digitalLumberjack/mk ... g-the-driv
pi@retropie:~/mkjoystick $
Riprovato da capo ma saltando, nella sezione installazione driver gpio, il punto
7 Aggiorniamo il sistema e ed installiamo i sorgenti del kernel:
CODICE: SELEZIONA TUTTO
sudo sh ./install.sh updatesystem
e passando direttamente al
punto 10 Lanciamo l'installer, stavolta senza opzioni, e attendiamo che il processo si concluda:
CODICE: SELEZIONA TUTTO
sudo sh ./install.sh
utilizzando il test da ssh nn dava segni di vita ma su emulationstation e attracck-mod .......... funziona !!!
di seguito metto i dettagli dell'installazione, per chi ci capisce possono essere utili:
login as: pi
pi@192.168.1.112's password:
.~~. .~~. Wednesday, 1 June 2016, 1:54:20 pm UTC
'. \ ' ' / .' Linux 4.1.19-v7+ armv7l GNU/Linux
.~ .~~~..~.
: .~.'~'.~. : Filesystem Size Used Avail Use% Mounted on
~ ( ) ( ) ~ /dev/root 29G 21G 7.3G 74% /
( : '~'.~.'~' : ) Uptime.............: 0 days, 00h02m12s
~ .~ ~. ~ Memory.............: 573192kB (Free) / 753136kB (Total)
( | | ) Running Processes..: 95
'~ ~' IP Address.........: 192.168.1.112
*--~-~--* Temperature........: CPU: 46°C/114°F GPU: 45°C/113°F
The RetroPie Project, http://www.petrockblock.com
pi@retropie:~ $ mkdir mkjoystick
pi@retropie:~ $ cd mkjoystick
pi@retropie:~/mkjoystick $ wget https://github.com/digitalLumberjack/mk_arcade_j oystick_rpi/releases/download/v0.1.4/install.sh
--2016-06-01 13:57:46-- https://github.com/digitalLumberjack/mk_arcade_joystick _rpi/releases/download/v0.1.4/install.sh
Resolving github.com (github.com)... 192.30.252.123
Connecting to github.com (github.com)|192.30.252.123|:443... connected.
HTTP request sent, awaiting response... 301 Moved Permanently
Location: https://github.com/recalbox/mk_arcade_j ... download/v 0.1.4/install.sh [following]
--2016-06-01 13:57:47-- https://github.com/recalbox/mk_arcade_joystick_rpi/rele ases/download/v0.1.4/install.sh
Reusing existing connection to github.com:443.
HTTP request sent, awaiting response... 302 Found
Location: https://github-cloud.s3.amazonaws.com/r ... d2c4-b4ef- 11e4-93c7-83cb0772a6ff.sh?X-Amz-Algorithm=AWS4-HMAC-SHA256&X-Amz-Credential=AKIA ISTNZFOVBIJMK3TQ%2F20160601%2Fus-east-1%2Fs3%2Faws4_request&X-Amz-Date=20160601T 135747Z&X-Amz-Expires=300&X-Amz-Signature=1c77584eb403d301a2c337c9b57a2b3aa67a94 33b352e8610d8d9bbff75f721a&X-Amz-SignedHeaders=host&actor_id=0&response-content- disposition=attachment%3B%20filename%3Dinstall.sh&response-content-type=applicat ion%2Foctet-stream [following]
--2016-06-01 13:57:47-- https://github-cloud.s3.amazonaws.com/releases/20679079 /467ed2c4-b4ef-11e4-93c7-83cb0772a6ff.sh?X-Amz-Algorithm=AWS4-HMAC-SHA256&X-Amz- Credential=AKIAISTNZFOVBIJMK3TQ%2F20160601%2Fus-east-1%2Fs3%2Faws4_request&X-Amz -Date=20160601T135747Z&X-Amz-Expires=300&X-Amz-Signature=1c77584eb403d301a2c337c 9b57a2b3aa67a9433b352e8610d8d9bbff75f721a&X-Amz-SignedHeaders=host&actor_id=0&re sponse-content-disposition=attachment%3B%20filename%3Dinstall.sh&response-conten t-type=application%2Foctet-stream
Resolving github-cloud.s3.amazonaws.com (github-cloud.s3.amazonaws.com)... 54.23 1.17.177
Connecting to github-cloud.s3.amazonaws.com (github-cloud.s3.amazonaws.com)|54.2 31.17.177|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 1797 (1.8K) [application/octet-stream]
Saving to: ‘install.sh’
install.sh 100%[=====================>] 1.75K --.-KB/s in 0.001s
2016-06-01 13:57:48 (2.81 MB/s) - ‘install.sh’ saved [1797/1797]
pi@retropie:~/mkjoystick $ chmod +x install.sh
pi@retropie:~/mkjoystick $ sudo sh ./install.sh
Installing required dependencies
Reading package lists... Done
Building dependency tree
Reading state information... Done
git is already the newest version.
joystick is already the newest version.
The following packages were automatically installed and are no longer required:
libgssapi3-heimdal libheimntlm0-heimdal libkdc2-heimdal
Use 'apt-get autoremove' to remove them.
The following extra packages will be installed:
cpp-4.6 firmware-linux-free gcc-4.6 libgcc-4.7-dev libuuid-perl linux-base
linux-headers-3.6-trunk-common linux-headers-3.6-trunk-rpi
linux-image-3.6-trunk-rpi linux-kbuild-3.6
Suggested packages:
gcc-4.6-locales gcc-4.7-locales libmudflap0-4.6-dev gcc-4.6-doc libgcc1-dbg
libgomp1-dbg libquadmath-dbg libmudflap0-dbg libcloog-ppl1 libcloog-ppl0
libppl-c4 libppl12 libppl9 libmudflap0-4.7-dev gcc-4.7-doc libitm1-dbg
libpwl5 linux-doc-3.6 debian-kernel-handbook fdutils
Recommended packages:
linux-headers-686-pae linux-headers-amd64 linux-headers-generic
linux-headers linux-image
The following NEW packages will be installed:
cpp-4.6 cpp-4.7 dkms firmware-linux-free gcc-4.6 gcc-4.7 libgcc-4.7-dev
libuuid-perl linux-base linux-headers-3.6-trunk-common
linux-headers-3.6-trunk-rpi linux-image-3.6-trunk-rpi linux-kbuild-3.6
0 upgraded, 13 newly installed, 0 to remove and 1 not upgraded.
Need to get 30.2 MB of archives.
After this operation, 111 MB of additional disk space will be used.
Get:1 http://mirrordirector.raspbian.org/raspbian/ jessie/main libuuid-perl armh f 0.05-1+b1 [10.0 kB]
Get:2 http://mirrordirector.raspbian.org/raspbian/ jessie/main linux-base all 3. 5 [34.3 kB]
Get:3 http://mirrordirector.raspbian.org/raspbian/ jessie/main linux-image-3.6-t runk-rpi armhf 3.6.9-1~experimental.1+rpi7 [10.0 MB]
Get:4 http://mirrordirector.raspbian.org/raspbian/ jessie/main cpp-4.6 armhf 4.6 .4-5+rpi1 [4,145 kB]
Get:5 http://mirrordirector.raspbian.org/raspbian/ jessie/main cpp-4.7 armhf 4.7 .3-11+rpi1 [3,252 kB]
Get:6 http://mirrordirector.raspbian.org/raspbian/ jessie/main dkms all 2.2.0.3- 2 [70.9 kB]
Get:7 http://mirrordirector.raspbian.org/raspbian/ jessie/main firmware-linux-fr ee all 3.3 [19.1 kB]
Get:8 http://mirrordirector.raspbian.org/raspbian/ jessie/main gcc-4.6 armhf 4.6 .4-5+rpi1 [4,363 kB]
Get:9 http://mirrordirector.raspbian.org/raspbian/ jessie/main libgcc-4.7-dev ar mhf 4.7.3-11+rpi1 [113 kB]
Get:10 http://mirrordirector.raspbian.org/raspbian/ jessie/main gcc-4.7 armhf 4. 7.3-11+rpi1 [3,433 kB]
Get:11 http://mirrordirector.raspbian.org/raspbian/ jessie/main linux-headers-3. 6-trunk-common armhf 3.6.9-1~experimental.1+rpi7 [4,189 kB]
Get:12 http://mirrordirector.raspbian.org/raspbian/ jessie/main linux-kbuild-3.6 armhf 3.6-1~experimental.1+rpi2 [135 kB]
Get:13 http://mirrordirector.raspbian.org/raspbian/ jessie/main linux-headers-3. 6-trunk-rpi armhf 3.6.9-1~experimental.1+rpi7 [414 kB]
Fetched 30.2 MB in 14s (2,059 kB/s)
Preconfiguring packages ...
Selecting previously unselected package libuuid-perl.
(Reading database ... 62842 files and directories currently installed.)
Preparing to unpack .../libuuid-perl_0.05-1+b1_armhf.deb ...
Unpacking libuuid-perl (0.05-1+b1) ...
Selecting previously unselected package linux-base.
Preparing to unpack .../linux-base_3.5_all.deb ...
Unpacking linux-base (3.5) ...
Selecting previously unselected package linux-image-3.6-trunk-rpi.
Preparing to unpack .../linux-image-3.6-trunk-rpi_3.6.9-1~experimental.1+rpi7_ar mhf.deb ...
Unpacking linux-image-3.6-trunk-rpi (3.6.9-1~experimental.1+rpi7) ...
Selecting previously unselected package cpp-4.6.
Preparing to unpack .../cpp-4.6_4.6.4-5+rpi1_armhf.deb ...
Unpacking cpp-4.6 (4.6.4-5+rpi1) ...
Selecting previously unselected package cpp-4.7.
Preparing to unpack .../cpp-4.7_4.7.3-11+rpi1_armhf.deb ...
Unpacking cpp-4.7 (4.7.3-11+rpi1) ...
Selecting previously unselected package dkms.
Preparing to unpack .../dkms_2.2.0.3-2_all.deb ...
Unpacking dkms (2.2.0.3-2) ...
Selecting previously unselected package firmware-linux-free.
Preparing to unpack .../firmware-linux-free_3.3_all.deb ...
Unpacking firmware-linux-free (3.3) ...
Selecting previously unselected package gcc-4.6.
Preparing to unpack .../gcc-4.6_4.6.4-5+rpi1_armhf.deb ...
Unpacking gcc-4.6 (4.6.4-5+rpi1) ...
Selecting previously unselected package libgcc-4.7-dev:armhf.
Preparing to unpack .../libgcc-4.7-dev_4.7.3-11+rpi1_armhf.deb ...
Unpacking libgcc-4.7-dev:armhf (4.7.3-11+rpi1) ...
Selecting previously unselected package gcc-4.7.
Preparing to unpack .../gcc-4.7_4.7.3-11+rpi1_armhf.deb ...
Unpacking gcc-4.7 (4.7.3-11+rpi1) ...
Selecting previously unselected package linux-headers-3.6-trunk-common.
Preparing to unpack .../linux-headers-3.6-trunk-common_3.6.9-1~experimental.1+rp i7_armhf.deb ...
Unpacking linux-headers-3.6-trunk-common (3.6.9-1~experimental.1+rpi7) ...
Selecting previously unselected package linux-kbuild-3.6.
Preparing to unpack .../linux-kbuild-3.6_3.6-1~experimental.1+rpi2_armhf.deb ...
Unpacking linux-kbuild-3.6 (3.6-1~experimental.1+rpi2) ...
Selecting previously unselected package linux-headers-3.6-trunk-rpi.
Preparing to unpack .../linux-headers-3.6-trunk-rpi_3.6.9-1~experimental.1+rpi7_armhf.deb ...
Unpacking linux-headers-3.6-trunk-rpi (3.6.9-1~experimental.1+rpi7) ...
Processing triggers for man-db (2.7.0.2-5) ...
Setting up libuuid-perl (0.05-1+b1) ...
Setting up linux-base (3.5) ...
Setting up linux-image-3.6-trunk-rpi (3.6.9-1~experimental.1+rpi7) ...
Running depmod.
Examining /etc/kernel/postinst.d.
run-parts: executing /etc/kernel/postinst.d/apt-auto-removal 3.6-trunk-rpi /boot/vmlinuz-3.6-trunk-rpi
run-parts: executing /etc/kernel/postinst.d/initramfs-tools 3.6-trunk-rpi /boot/vmlinuz-3.6-trunk-rpi
update-initramfs: Generating /boot/initrd.img-3.6-trunk-rpi
Setting up cpp-4.6 (4.6.4-5+rpi1) ...
Setting up cpp-4.7 (4.7.3-11+rpi1) ...
Setting up dkms (2.2.0.3-2) ...
Setting up firmware-linux-free (3.3) ...
update-initramfs: deferring update (trigger activated)
Setting up gcc-4.6 (4.6.4-5+rpi1) ...
Setting up libgcc-4.7-dev:armhf (4.7.3-11+rpi1) ...
Setting up gcc-4.7 (4.7.3-11+rpi1) ...
Setting up linux-headers-3.6-trunk-common (3.6.9-1~experimental.1+rpi7) ...
Setting up linux-kbuild-3.6 (3.6-1~experimental.1+rpi2) ...
Setting up linux-headers-3.6-trunk-rpi (3.6.9-1~experimental.1+rpi7) ...
Examining /etc/kernel/header_postinst.d.
run-parts: executing /etc/kernel/header_postinst.d/dkms 3.6-trunk-rpi
Processing triggers for initramfs-tools (0.120+deb8u1) ...
ln: failed to create hard link ‘/boot/initrd.img-3.6-trunk-rpi.dpkg-bak’ => ‘/boot/initrd.img-3.6-trunk-rpi’: Operation not
update-initramfs: Generating /boot/initrd.img-3.6-trunk-rpi
Downloading current kernel headers
--2016-06-01 14:03:18-- http://www.niksula.hut.fi/~mhiienka/Rpi ... 9-v7+-2_ar
Resolving www.niksula.hut.fi (www.niksula.hut.fi)... 130.233.43.7, 2001:708:20:e337:8
fedd:f36aConnecting to www.niksula.hut.fi (www.niksula.hut.fi)|130.233.43.7|:80... connected.
HTTP request sent, awaiting response... 302 Moved Temporarily
Location: https://www.niksula.hut.fi/~mhiienka/Rp ... _armhf.deb [follo
--2016-06-01 14:03:18-- https://www.niksula.hut.fi/~mhiienka/Rp ... 19-v7+-2_a
Connecting to www.niksula.hut.fi (www.niksula.hut.fi)|130.233.43.7|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 8923122 (8.5M) [application/octet-stream]
Saving to: ‘linux-headers-4.1.19-v7+_4.1.19-v7+-2_armhf.deb’
linux-headers-4.1.19-v7+_4.1.19-v7+-2_armhf.deb 100%[==========================================================
2016-06-01 14:03:21 (3.60 MB/s) - ‘linux-headers-4.1.19-v7+_4.1.19-v7+-2_armhf.deb’ saved [8923122/8923122]
Installing current kernel headers
Selecting previously unselected package linux-headers-4.1.19-v7+.
(Reading database ... 72064 files and directories currently installed.)
Preparing to unpack linux-headers-4.1.19-v7+_4.1.19-v7+-2_armhf.deb ...
Unpacking linux-headers-4.1.19-v7+ (4.1.19-v7+-2) ...
Setting up linux-headers-4.1.19-v7+ (4.1.19-v7+-2) ...
make: Entering directory '/usr/src/linux-headers-4.1.19-v7+'
HOSTCC scripts/basic/fixdep
HOSTCC scripts/basic/bin2c
HOSTCC scripts/kconfig/conf.o
HOSTCC scripts/kconfig/zconf.tab.o
HOSTLD scripts/kconfig/conf
*** Default configuration is based on 'bcm2709_defconfig'
#
# configuration written to .config
#
make: Leaving directory '/usr/src/linux-headers-4.1.19-v7+'
make: Entering directory '/usr/src/linux-headers-4.1.19-v7+'
scripts/kconfig/conf --silentoldconfig Kconfig
CHK include/config/kernel.release
UPD include/config/kernel.release
WRAP arch/arm/include/generated/asm/bitsperlong.h
WRAP arch/arm/include/generated/asm/cputime.h
WRAP arch/arm/include/generated/asm/current.h
WRAP arch/arm/include/generated/asm/emergency-restart.h
WRAP arch/arm/include/generated/asm/errno.h
WRAP arch/arm/include/generated/asm/exec.h
WRAP arch/arm/include/generated/asm/ioctl.h
WRAP arch/arm/include/generated/asm/ipcbuf.h
WRAP arch/arm/include/generated/asm/irq_regs.h
WRAP arch/arm/include/generated/asm/kdebug.h
WRAP arch/arm/include/generated/asm/local.h
WRAP arch/arm/include/generated/asm/local64.h
WRAP arch/arm/include/generated/asm/mcs_spinlock.h
WRAP arch/arm/include/generated/asm/msgbuf.h
WRAP arch/arm/include/generated/asm/param.h
WRAP arch/arm/include/generated/asm/parport.h
WRAP arch/arm/include/generated/asm/poll.h
WRAP arch/arm/include/generated/asm/preempt.h
WRAP arch/arm/include/generated/asm/resource.h
WRAP arch/arm/include/generated/asm/rwsem.h
WRAP arch/arm/include/generated/asm/scatterlist.h
WRAP arch/arm/include/generated/asm/seccomp.h
WRAP arch/arm/include/generated/asm/sections.h
WRAP arch/arm/include/generated/asm/segment.h
WRAP arch/arm/include/generated/asm/sembuf.h
WRAP arch/arm/include/generated/asm/serial.h
WRAP arch/arm/include/generated/asm/shmbuf.h
WRAP arch/arm/include/generated/asm/siginfo.h
WRAP arch/arm/include/generated/asm/simd.h
WRAP arch/arm/include/generated/asm/sizes.h
WRAP arch/arm/include/generated/asm/socket.h
WRAP arch/arm/include/generated/asm/sockios.h
WRAP arch/arm/include/generated/asm/termbits.h
WRAP arch/arm/include/generated/asm/termios.h
WRAP arch/arm/include/generated/asm/timex.h
WRAP arch/arm/include/generated/asm/trace_clock.h
WRAP arch/arm/include/generated/asm/unaligned.h
CHK include/generated/uapi/linux/version.h
UPD include/generated/uapi/linux/version.h
CHK include/generated/utsrelease.h
UPD include/generated/utsrelease.h
Generating include/generated/mach-types.h
CC kernel/bounds.s
CHK include/generated/bounds.h
UPD include/generated/bounds.h
CC arch/arm/kernel/asm-offsets.s
CHK include/generated/asm-offsets.h
UPD include/generated/asm-offsets.h
CALL scripts/checksyscalls.sh
grep: scripts/../arch/x86/syscalls/syscall_32.tbl: No such file or directory
HOSTCC scripts/dtc/dtc.o
HOSTCC scripts/dtc/flattree.o
HOSTCC scripts/dtc/fstree.o
HOSTCC scripts/dtc/data.o
HOSTCC scripts/dtc/livetree.o
HOSTCC scripts/dtc/treesource.o
HOSTCC scripts/dtc/srcpos.o
HOSTCC scripts/dtc/checks.o
HOSTCC scripts/dtc/util.o
SHIPPED scripts/dtc/dtc-lexer.lex.c
SHIPPED scripts/dtc/dtc-parser.tab.h
HOSTCC scripts/dtc/dtc-lexer.lex.o
SHIPPED scripts/dtc/dtc-parser.tab.c
HOSTCC scripts/dtc/dtc-parser.tab.o
HOSTLD scripts/dtc/dtc
HOSTCC scripts/genksyms/genksyms.o
SHIPPED scripts/genksyms/parse.tab.c
HOSTCC scripts/genksyms/parse.tab.o
SHIPPED scripts/genksyms/lex.lex.c
SHIPPED scripts/genksyms/keywords.hash.c
SHIPPED scripts/genksyms/parse.tab.h
HOSTCC scripts/genksyms/lex.lex.o
HOSTLD scripts/genksyms/genksyms
CC scripts/mod/empty.o
HOSTCC scripts/mod/mk_elfconfig
MKELF scripts/mod/elfconfig.h
HOSTCC scripts/mod/modpost.o
CC scripts/mod/devicetable-offsets.s
GEN scripts/mod/devicetable-offsets.h
HOSTCC scripts/mod/file2alias.o
HOSTCC scripts/mod/sumversion.o
HOSTLD scripts/mod/modpost
HOSTCC scripts/kallsyms
HOSTCC scripts/pnmtologo
HOSTCC scripts/conmakehash
HOSTCC scripts/recordmcount
HOSTCC scripts/sortextable
make: Leaving directory '/usr/src/linux-headers-4.1.19-v7+'
Downloading mk_arcade_joystick_rpi 0.1.4
--2016-06-01 14:07:49-- https://github.com/digitalLumberjack/mk ... arcade-joy
Resolving github.com (github.com)... 192.30.252.120
Connecting to github.com (github.com)|192.30.252.120|:443... connected.
HTTP request sent, awaiting response... 301 Moved Permanently
Location: https://github.com/recalbox/mk_arcade_j ... -0.1.4.deb [fol
--2016-06-01 14:07:49-- https://github.com/recalbox/mk_arcade_j ... ystick-rpi
Reusing existing connection to github.com:443.
HTTP request sent, awaiting response... 302 Found
Location: https://github-cloud.s3.amazonaws.com/r ... tet-stream [following]
--2016-06-01 14:07:50-- https://github-cloud.s3.amazonaws.com/r ... tet-stream
Resolving github-cloud.s3.amazonaws.com (github-cloud.s3.amazonaws.com)... 54.231.32.107
Connecting to github-cloud.s3.amazonaws.com (github-cloud.s3.amazonaws.com)|54.231.32.107|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 14908 (15K) [application/octet-stream]
Saving to: ‘mk-arcade-joystick-rpi-0.1.4.deb’
mk-arcade-joystick-rpi-0.1.4.deb 100%[==========================================================
2016-06-01 14:07:50 (120 KB/s) - ‘mk-arcade-joystick-rpi-0.1.4.deb’ saved [14908/14908]
Installing mk_arcade_joystick_rpi 0.1.4
Selecting previously unselected package mk-arcade-joystick-rpi-dkms.
(Reading database ... 85648 files and directories currently installed.)
Preparing to unpack mk-arcade-joystick-rpi-0.1.4.deb ...
Unpacking mk-arcade-joystick-rpi-dkms (0.1.4) ...
Setting up mk-arcade-joystick-rpi-dkms (0.1.4) ...
Loading new mk_arcade_joystick_rpi-0.1.4 DKMS files...
First Installation: checking all kernels...
It is likely that 4.1.19-v7+ belongs to a chroot's host
Building for architecture armv7l
Building initial module for 4.1.19-v7+
Done.
mk_arcade_joystick_rpi:
Running module version sanity check.
- Original module
- No original module exists within this kernel
- Installation
- Installing to /lib/modules/4.1.19-v7+/updates/dkms/
depmod.....
DKMS: install completed.
Installation OK
Load the module with 'sudo modprobe mk_arcade_joystick_rpi map=1' for 1 joystick
or with 'sudo modprobe mk_arcade_joystick_rpi map=1,2' for 2 joysticks
See https://github.com/digitalLumberjack/mk ... g-the-driv
pi@retropie:~/mkjoystick $