Benvenuto Ospite,
per utilizzare il Forum ed avere accesso a tutte le sezioni e poter aprire un tuo Topic, rispondere nelle varie discussioni, mandare o ricevere Messaggi Privati devi seguire pochi passaggi:


Leggi il nostro Regolamento -> PREMI QUI <-
Segui il link su come Iscriversi -> PREMI QUI <-


Ricordati di aggiornare l'Avatar usando una immagine che ti distingua nel Forum

Problemi Lightgun...help me please

Guide, richieste e tutto ciò che c'è da sapere sui controlli del cab
Avatar utente
Flash75

Donatore
Newbie
Newbie
Messaggi: 24
Iscritto il: 17/01/2009, 20:38
Medaglie: 1

Problemi Lightgun...help me please

Messaggio da Flash75 »

Ciao a tutti ....dopo un anno di inattività il mese scorso ho ripreso a lavorare sul cab... e grazie alle mille dritte trovate sul forum ho quasi finito!!!!
Al momento è quasi tutto funzionante... ancora qualche lavoretto estetico ed è fatta! <-clap->
Mi rimane un ultimo prblema:
Ho installato wingun e la mia lightgun è una Hais guncon2 compatibile .
Non riesco però a farla funzionare in nessun modo..nel senso che quando lancio wingun mi dice che la pistola non è collegata !!!
Nel log mi dice che non riesce a caricare i 4 file ini di configurazione
scrive
failed to open gun1profile.ini ecc...
In che cosa sbaglio???? <-dash->
Grazie in ogni caso ....... :D
I wanna Rock and Roll all nite and party every day
Avatar utente
Kernel
God of Arcade
God of Arcade
Messaggi: 6794
Iscritto il: 25/07/2005, 10:54
Grazie Inviati: 2 volte
Grazie Ricevuti: 2 volte

Re: Problemi Lightgun...help me please

Messaggio da Kernel »

Riesci ad aprire "a mano" il file "gun1profile.ini"?
Avatar utente
Flash75

Donatore
Newbie
Newbie
Messaggi: 24
Iscritto il: 17/01/2009, 20:38
Medaglie: 1

Re: Problemi Lightgun...help me please

Messaggio da Flash75 »

Ciao Kernel...grazie dell'interessamento :D
a dire il vero ho formattato hd ...oggi carico di nuovo tutto
riprovo ad installare la pistola e se il problema persiste ti posto l'ini.

Grazie ancora
I wanna Rock and Roll all nite and party every day
Avatar utente
Kernel
God of Arcade
God of Arcade
Messaggi: 6794
Iscritto il: 25/07/2005, 10:54
Grazie Inviati: 2 volte
Grazie Ricevuti: 2 volte

Re: Problemi Lightgun...help me please

Messaggio da Kernel »

Vaaaa bene :wink:
Avatar utente
Flash75

Donatore
Newbie
Newbie
Messaggi: 24
Iscritto il: 17/01/2009, 20:38
Medaglie: 1

Re: Problemi Lightgun...help me please

Messaggio da Flash75 »

Purtroppo non ho risolto nulla ...stesso problema.. <-lmfao->
posto il contenuto del file ini :

// Initialization file For Acorn's WinGun Driver, Gun #1
// Version 0.081B
//
// Contains the name to be associated with this profile in profile manager
ProfileName Gun_#1_Default
//
// Calibration Values
EdgeLeft 1280
EdgeRight 0
EdgeTop 768
EdgeBottom 0
//
// Centering values will NOT be set during calibration.
CenterX 0
CenterY 0
//
// Can be ROLLING , NORMAL or DETECT
// If it is set to ROLLING or NORMAL, calibration will
// not try to detect your guntype, but you can still calibrate.
GunMode DETECT
//
// ON, OFF, or DONE (Meaning it calibrated and is finished. Set to On to recalibrate)
AutoCalib OFF
//
// Key configurations. Can be set to 01 (MOUSE1), 02 (MOUSE2) 03 (MOUSE3) or any key in the
// windows virtual keymap.
// For a list of avalible keys, check here:
// http://msdn.microsoft.com/library/defau ... yCodes.asp
// Find the key you want, and use the number (hex) beside it
MainTrigger 01 AF // Default Click
Start D NOAF // Default Enter
Select 20 NOAF // Default Space
ButtonA 41 NOAF // Default A
ButtonB 42 NOAF // Default B
ButtonC 43 NOAF // Default C
DUp 26 NOAF // Default Up Arrow
DDown 28 NOAF // Default Down Arrow
DLeft 25 NOAF // Default Left Arrow
DRight 27 NOAF // Default Right Arrow
//
// OffScreen Trigger is a special button, which triggers when you press the main trigger
// when the gun is aiming off the screen
// It can be set to FF (MAME mode) to click once on the edge of the screen, or any key/mouse
OffScreenTrigger FF NOAF // Default MAME Mode
//
// Can be DRAG, or SINGLE . Drag holds down the button for as long as you hold it down
// while single clicks once in the location you were pointing at at time of firing
FireMode SINGLE
//
// Overrides firemode - shoots a bullet every AutoFireDelay ms if the button is held down.
// I find it works best if you tap.
AutoFire OFF
//
// Sets the number of MS to wait between autofire shots
AutoFireDelay 100
//
// Works in all modes. Every AutoFireShots shot is an offscreen shot
AutoReload OFF
//
// Sets the number of shots between an AutoReload
AutoReloadShots 5
//
// Do we flash the screen bright when the trigger is pulled down?
ScreenFlash ON
//
// End of INI
I wanna Rock and Roll all nite and party every day
Avatar utente
Kernel
God of Arcade
God of Arcade
Messaggi: 6794
Iscritto il: 25/07/2005, 10:54
Grazie Inviati: 2 volte
Grazie Ricevuti: 2 volte

Re: Problemi Lightgun...help me please

Messaggio da Kernel »

Dove hai installato il programma?
Prova a metterlo in una cartella in C:\ e non in C:\Programmi
Avatar utente
Flash75

Donatore
Newbie
Newbie
Messaggi: 24
Iscritto il: 17/01/2009, 20:38
Medaglie: 1

Re: Problemi Lightgun...help me please

Messaggio da Flash75 »

Ahhh ... niente da fare ci ho provato ma non è cambiato nulla
Domani provo la pistola su una ps2 ... cosi almeno capisco se funziona .
Ti faccio sapere e ..... GRAZIE ! :D
I wanna Rock and Roll all nite and party every day
Avatar utente
Kernel
God of Arcade
God of Arcade
Messaggi: 6794
Iscritto il: 25/07/2005, 10:54
Grazie Inviati: 2 volte
Grazie Ricevuti: 2 volte

Re: Problemi Lightgun...help me please

Messaggio da Kernel »

Un'ultima cosa... domanda abbastanza stupida: sulla pistola hai il selettore su "GunCon2?
Avatar utente
Flash75

Donatore
Newbie
Newbie
Messaggi: 24
Iscritto il: 17/01/2009, 20:38
Medaglie: 1

Re: Problemi Lightgun...help me please

Messaggio da Flash75 »

Provato la pistola sulla ps2 e funziona.....non ho ancora capito se essere contento!
:?
Si il selettore lo ho messo su Guncon2...
ora ....l'usb funziona perchè ci ho attaccato un mouse e lo vede
pistola pure......
quindi il problema è software....
ieri ho provato a fare il detect ( sul pannello di config di wingun ) senza che la pistola fosse collegata ed il risultato era lo stesso
quando la collego il pc la sente perchè parte in automatico l'installazione dei driver
ma poi nulla.....
questa sera provo a postare il log di tutto quello che succede prima dell'errore magari ne esce qualcosa...
Grazie
I wanna Rock and Roll all nite and party every day
Avatar utente
Flash75

Donatore
Newbie
Newbie
Messaggi: 24
Iscritto il: 17/01/2009, 20:38
Medaglie: 1

Re: Problemi Lightgun...help me please

Messaggio da Flash75 »

Probabilmente lo sapete già ...visto che ieri il capo dello Stato
si è collegato a reti unificate per dare la notizia ....
Funziona!!! La pistola Funziona...
Volevo ringraziare tutti quelli che mi sono stati vicini ...il mister la mia famiglia la lega mame....... <-thumbup->

Scherzi a parte tutto risolto ....
come da suggerimento di Kernel ho installato wingun in c:
ho installato manualmente i driver...senza la configurazione guidata di windows
ed ho invertito fisicamente gun e mouse nelle usb
e funziona a meraviglia !! \:D/

Grazie al maestro Obi-Wan Kenobi " Kernel" per le dritte e la disponibilità!!!! MITICO!!!!
Ed ora mi occupo di rifare la plancia comandi ...piastra di Lexan e un bel disegno vettoriale sotto!!
E poi...qualcosa mi inventerò.....è troppo bello smanettare sul cab!


Ciao Ciao
I wanna Rock and Roll all nite and party every day
Avatar utente
Kernel
God of Arcade
God of Arcade
Messaggi: 6794
Iscritto il: 25/07/2005, 10:54
Grazie Inviati: 2 volte
Grazie Ricevuti: 2 volte

Re: Problemi Lightgun...help me please

Messaggio da Kernel »

Ottimo!
Flash75 ha scritto:Grazie al maestro Obi-Wan Kenobi " Kernel" per le dritte e la disponibilità!!!! MITICO!!!!
Io sono "Obi-Wan per Hobby" (cit. GemBoy): http://www.youtube.com/watch?v=X3BrOSm9Qv8 <-lol->
Rispondi

Torna a “Controlli (joystick, pulsanti, trackball, spinner, volanti, ecc...)”