ArcadeItalia.NET

Calamity

Hi moket,

I'm very sorry that it didn't work. If you still wan't to keep your card try using the drivers provided by the manufacturer and use VMMaker over them, just limit the TotalModes to 60 and there's a possibility that it could work. Consider sending me the original drivers so I can dig in ...

Calamity

Hi Calamity...
If i understood, i must to install only the "Realtek ATI HDMI Audio Device driver", right???!!!

Yes. This is because you already have the driver installed, but you have that yellow exclamation in Device Manager. Let's see if installing the Realtek driver helps fixing that.

If ...

Calamity

Hi moket, before looking for another card please try installing the Realtek drivers on the link I posted, they're for the HDMI but may be part of the problem (not sure).

Calamity

Hi moket, thanks a lot for your video and time.

It looks like your card is a very special one, AMD didn't launch any AGP card since X1950 so all newer AGP cards are "unofficial" and not suported by AMD, so there are a lot of issues with the drivers. There is a hotfix but not for Catalyst 9.3 (http ...

Calamity

Hi moket, I've repacked the drivers with your card added, let's see if you it works now:

http://www.megaupload.com/?d=8IL74TBH

At the start the vwmaker send me a message: NO COMPATIBLE VIDEO DRIVER FOUND

That means that the driver is not even loaded, so it just loads a default video driver ...

Calamity

I didnt try it. Refresh me: For first i must run a VMMaker and after reinstalling CRT driver, right?!
I will try in monday and send a message to you.
Thanks

First: install the driver.
Second: after restart, run VMMaker, and restart again.

This shouldn't be necessary in a normal situation but ...

Calamity

Hi calamity...
The driver dont run.
I tryed to uninstall the ATI driver whit Catalyst Uninstaller program and manually too. I tryed to reinstall a new system operating (xp sp3) but nothing new. I have made these tests on 2 different PC. <-dash->

That's weird. Have you tried running VMMaker to ...

Calamity

PaTrYcK ha scritto:Thanks calamity!
I have to check some parameters will damage the monitor?

Increasing/decreasing the porch values won't damage your monitor. The danger is with frequencies out of range (horizontal and vertical).

Calamity

Mi riferivo al solo orizzontale, x centrarlo agisco ovviamente su H center, ma x allargare/stringere?
Questa la schermata su horizontal geometry:

In order to modify the width of the picture what you have to do is to increase/decrease the right and left borders, once you play with it for a while ...

Calamity

Yes Calamity, my desktop run at 640x480 but not at 15khz. From arcadeosd i cant select 15 khz frequenze but only resoluction. The string of the KHZ is empty (.......) for every resolution. How i can do it??
Thanks

Then it's clear that the CRT_Emudriver is not active. Windows is choosing a ...

Calamity

That's fine, I don't include the Quickres app with the version 9.3

Probably you didn't set your desktop to 640x480 before installing the driver, did you? It could be showing 800x600 or whatever.
Use Arcade_OSD instead to select the right 15Khz resolution for the desktop, use a PC monitor during the ...

Calamity

Hi moket1978,

Replace the files in the driver installation folder with the ones I've attached (this is for 32-bit version!!), be carefull to put each file in the right place (CX_76825.inf goes in XP_INF folder). Then try to install the driver.

Good luck!

Calamity

This is the message error: Setup did not find a driver compatible whit current hardware or operating system.
and this is the PCI identifiers: PCI\VEN_1002&DEV_9495&SUBSYS_0028174B&REV_00\4&354AEA31&0&0008
What you think about it?
Thanks

Hi moket1978,

I've confirmed your card ID is not ...

Calamity

Hi moket1978,

What I need are PCI identifiers, they look like this:

PCI\VEN_1002&DEV_954F&SUBSYS_02A81043&REV_00
PCI\VEN_1002&DEV_954F&SUBSYS_02A81043

Patryk, you need to enable the -keepaspect option.

Calamity

Hi moket1978,

Please get the PCI hardware identifiers of your card (from device manager) and paste them here.

Calamity

Hi Abufinzio,

That's completely normal, CRT_Emudriver does not block native high res modes, so if your monitor was previously setup to, for instance at 1280x1024, that resolution will still be used and the LCD will show the picture.

You need to change your desktop resolution to something that's ...

Calamity

Bopaul ha scritto:Thanks for your reply, now all is clean.
At this point i have i question:
If i mark the external monitor like fist monitor, your driver work?

Yes, I think it should work fine that way.

Calamity

Ciao.
Dopo prove riprove prove e riprove sono arrivato a questa configurazione:
- Driver originale ATI e non quello di Calamity. Quest'ultimo, anche impostando Vsynch ecc, mi dava un sacco di problemi in MAME.
- Soft15Khz, con risoluzione a 640x480.
- Ho utilizzato VMMAKER per configurare le ...

Calamity

Ok calamity, i try your software early!
Last question, if i must connect monitor 31khz for some test, only way for disable your 15khz is uninstall ati driver?

Thanks <-clap->

Well, actually if you have an LCD probably you'll be able to use it with my drivers and still have 31Khz output, provided ...

Calamity

Over 448 lines use only interlaced resolution, ok...but why all resolution above 288 lines until 448 will be interlaced + streched instead of only streched?

Because, in my opinion, when we stretch a game, the highest the resolution is, the better the result will be (more detail). So by ...

ArcadeItalia.NET

La ricerca ha trovato 40 risultati

Re: Driver ATI 15khz nativo e tools per gestire le risoluzio

Re: Driver ATI 15khz nativo e tools per gestire le risoluzio

Re: Driver ATI 15khz nativo e tools per gestire le risoluzio

Re: Driver ATI 15khz nativo e tools per gestire le risoluzio

Re: Driver ATI 15khz nativo e tools per gestire le risoluzio

Re: Driver ATI 15khz nativo e tools per gestire le risoluzio

Re: Driver ATI 15khz nativo e tools per gestire le risoluzio

Re: Driver ATI 15khz nativo e tools per gestire le risoluzioni

Re: Driver ATI 15khz nativo e tools per gestire le risoluzioni

Re: Driver ATI 15khz nativo e tools per gestire le risoluzioni

Re: Driver ATI 15khz nativo e tools per gestire le risoluzioni

Re: Driver ATI 15khz nativo e tools per gestire le risoluzioni

Re: Driver ATI 15khz nativo e tools per gestire le risoluzioni

Re: Driver ATI 15khz nativo e tools per gestire le risoluzioni

Re: Driver ATI 15khz nativo e tools per gestire le risoluzioni

Re: [AIUTO] Problema con CTR EmuDriver 1.2a

Re: Driver ATI 15khz nativo e tools per gestire le risoluzioni

Re: Driver ATI 15khz nativo e tools per gestire le risoluzioni

Re: Driver ATI 15khz nativo e tools per gestire le risoluzioni

Re: Driver ATI 15khz nativo e tools per gestire le risoluzioni