[OLD] FEEL - NEWS E PROPOSTE
Moderatore: Moderatori F.E.E.L.
-
dR.pRoDiGy
- Moderatore F.E.E.L.
- Messaggi: 3069
- Iscritto il: 17/11/2009, 15:55
- Medaglie: 1
- Città: Prov_Milano_zona_Sempione
- Grazie Inviati: 10 volte
- Grazie Ricevuti: 17 volte
Re: [RELEASE] FEEL FRONTEND 1.9
Errore mai visto!
Rispetto alla config standard, puoi spiegare che modifiche hai fatto?
Rispetto alla config standard, puoi spiegare che modifiche hai fatto?
"Non si smette di giocare perché si diventa vecchi, ma si diventa vecchi perché si smette di giocare"
F.E.E.L. - FrontEnd (Emulator Launcher)
http://feelfrontend.altervista.org
https://github.com/dr-prodigy/feel-frontend/
F.E.E.L. - FrontEnd (Emulator Launcher)
http://feelfrontend.altervista.org
https://github.com/dr-prodigy/feel-frontend/
-
Simo
- Affezionato
- Messaggi: 193
- Iscritto il: 24/09/2015, 22:13
- Medaglie: 1
- Città: Mantova
- Grazie Inviati: 8 volte
Re: [RELEASE] FEEL FRONTEND 1.9
Penso niente di particolare, ho modificato solo i tasti in feel.ini , e i vari percorsi in mame.inidR.pRoDiGy ha scritto:Errore mai visto!
Rispetto alla config standard, puoi spiegare che modifiche hai fatto?
Comunque, dopo magari pubblico i due ini
-
Simo
- Affezionato
- Messaggi: 193
- Iscritto il: 24/09/2015, 22:13
- Medaglie: 1
- Città: Mantova
- Grazie Inviati: 8 volte
Re: [RELEASE] FEEL FRONTEND 1.9
Ecco qua il mio feel.ini
E il mame.ini
Altro non ho cambiato, ho visto nel feel "precompilato" di Salvo, lui nella sua cartella ha molte più cose. Forse a me manca qualche cosa?
Codice: Seleziona tutto
####################################################################################################
# #
# Front-End Emulator Launcher #
# #
# Copyright © FEELTeam Software 2015 #
# #
####################################################################################################
#==================================================================================================#
# System Settings
#==================================================================================================#
#--------------------------------------------------------------------------------------------------#
# 1 = test mode (windowed) | 0 = standard mode (fullscreen)
#
test_mode 0
#--------------------------------------------------------------------------------------------------#
# 1 = layout test mode (highlight labels: useful for layout design) | 0 = standard mode
#
layout_test_mode 0
#--------------------------------------------------------------------------------------------------#
# 1 = change resolution according to layout | 0 = no resolution change
#
switch_res 1
#--------------------------------------------------------------------------------------------------#
# Screen rotation support (for vertical CRT's cabs)
#--------------------------------------------------------------------------------------------------#
#--------------------------------------------------------------------------------------------------#
# 0 = none ( = horizontal screen)
# 1 = rotate 90° ( = vertical screen)
rotate_screen 0
#==================================================================================================#
# FE Settings
#==================================================================================================#
platform_list arcade, computer, console
current_platform arcade
current_layout sheet
fulltext_search 0
#--------------------------------------------------------------------------------------------------#
# managed by system: no need to touch here!
#
autostart_mode 0
autostart_single_game arcade|mame|mame-0|strhoop
last_game_played arcade|mame|mame-1|mslugx
#==================================================================================================#
# Exit Menu Items
#==================================================================================================#
exit_to_windows_menu_enabled 1
restart_windows_menu_enabled 0
shut_down_menu_enabled 1
standby_menu_enabled 0
hibernate_menu_enabled 0
#==================================================================================================#
# Keyboard
#==================================================================================================#
#--------------------------------------------------------------------------------------------------#
# min / max keyboard scroll rate (milliseconds)
#
keyboard_scroll_rate 225
keyboard_min_scroll_rate 20
#==================================================================================================#
# Mouse
#==================================================================================================#
#--------------------------------------------------------------------------------------------------#
# 0 = no mouse support | 1 = x-axis | 2 = y-axis
#
use_mouse 0
#--------------------------------------------------------------------------------------------------#
# mouse scroll rate
#
mouse_scroll_rate 20
#--------------------------------------------------------------------------------------------------#
# mouse deadzone (pixels)
#
mouse_sensitivity 5
#==================================================================================================#
# Joypad
#==================================================================================================#
#--------------------------------------------------------------------------------------------------#
# 1 = yes | 0 = no
#
use_joypad 0
#--------------------------------------------------------------------------------------------------#
# 0 <= DeadZone >= 5000 (for analog axes)
#
joypad_dead_zone 2500
#==================================================================================================#
# ScreenSaver
#==================================================================================================#
#--------------------------------------------------------------------------------------------------#
# 1 = on | 0 = off
#
screen_saver_enabled 1
#--------------------------------------------------------------------------------------------------#
# seconds
#
screen_saver_delay 30
screen_saver_slide_time 5
#==================================================================================================#
# ScreenShot
#==================================================================================================#
screenshot_original_size 0
screenshot_width 320
screenshot_height 240
screenshot_stretch_to_fixed_size 1
#==================================================================================================#
# Sound FX
#==================================================================================================#
sound_fx_list list.wav
sound_fx_menu menu.wav
sound_fx_confirm confirm.wav
sound_fx_cancel cancel.wav
sound_fx_volume 100
#==================================================================================================#
# Background Music
#==================================================================================================#
music_path gems.wav
music_volume 50
#==================================================================================================#
# Videosnap
#==================================================================================================#
#--------------------------------------------------------------------------------------------------#
# seconds
#
video_delay 2
#--------------------------------------------------------------------------------------------------#
# 0-100
#
video_volume 30
#--------------------------------------------------------------------------------------------------#
# 1x - 1.5x - 2x ...
#
video_speed 1
#==================================================================================================#
# Input Commands
#==================================================================================================#
#--------------------------------------------------------------------------------------------------#
# Keyboard codes
#--------------------------------------------------------------------------------------------------#
# A ... Z
# 0 ... 9
# LAlt = Left Alt
# LControl, LCtrl = Left Control
# RControl, RCtrl = Right Control
# LWin = Left Windows
# RWin = Right Windows
# Tab = Tab key
# Space = Spacebar
# Backspace = Backspace
# Enter, Return = Enter
# Pause = Pause
# Escape, Esc = Esc
# PageUp = Page Up
# PageDown = Page Down
# End = End
# Home = Home
# Insert, Ins = Ins
# Delete, Del = Del
# NumPad0 ... 9 = NumPad keys
# Multiply = *
# Add = +
# Subtract = -
# Divide = /
# F1..F12 = Function keys
# None = No key (useful to totally disable a keypress)
#--------------------------------------------------------------------------------------------------#
# JoyPad codes
#--------------------------------------------------------------------------------------------------#
# JoyUp
# JoyDown
# JoyLeft
# JoyRight
# JoyB1 ... 15
#--------------------------------------------------------------------------------------------------#
# NOTE: action_key and menu_key are also used as menu_ok and menu_cancel
#
action_key q
menu_key 5
menu_ok a
menu_cancel s
menu_up Up
menu_down Down
menu_left Left
menu_right Right
previous_game Up
next_game Down
previous_letter_game d
next_letter_game c
previous_page Left
next_page Right
find_game x
select_platform f
select_emulator j
select_gamelist z
next_platform
next_emulator
next_gamelist
previous_platform
previous_emulator
previous_gamelist
add_game_to_list l
remove_game_from_list 9
show_custom_image
show_game_info h
show_exit_menu w
screensaver_previous_game
screensaver_next_game
next_sort
reload_config
#--------------------------------------------------------------------------------------------------#
# SmartASD USB interface (commands, LEDs, etc.) support
#--------------------------------------------------------------------------------------------------#
#--------------------------------------------------------------------------------------------------#
# 0 = none (no SmartASD present)
# 1 = shared mode (single SmartASD for commands and LEDs = 5 LED channels per player)
# 2 = dedicated mode (SmartASD dedicated to LEDs = 13 LED channels per player)
# 3 = dedicated mode with 6 buttons (SmartASD dedicated to LEDs = 13 LED channels per player)
#
smartasd_mode 0
#--------------------------------------------------------------------------------------------------#
# 1 = enable SmartASD debug mode (display LED status on screen) | 0 = no debug
#
smartasd_debug_mode 0
#--------------------------------------------------------------------------------------------------#
# * = use first SmartASD available
#
smartasd_id *
#--------------------------------------------------------------------------------------------------#
# set commands used during list browsing and menu (relevant LEDs will be highlighted)
#
frontend_list_controls joy1|start1|bt1-1|bt1-2|dial1|joy2|start2|extra1|side1|side2
frontend_menu_controls joy1|start1|bt1-1|bt1-2|dial1|start2|extra1|side1|side2
service_mode 1
service_mode_available 1
#--------------------------------------------------------------------------------------------------#
# FEEL OTA update
#--------------------------------------------------------------------------------------------------#
#--------------------------------------------------------------------------------------------------#
# 1 = enable upgrading to beta versions too | 0 = no beta versions
#
update_beta 1
feel_uuid 11111111-1111-1111-1111-111111111111
Codice: Seleziona tutto
####################################################################################################
# #
# F.E.E.L. - FrontEnd (Emulator Launcher) #
# #
# Copyright © FEELTeam 2015 #
# #
####################################################################################################
emulator_title M.A.M.E.
gamelist_list mame-0, mame-1, mame-2, mame-3
current_gamelist mame-1
rom_path C:\Documents and Settings\Simo\Desktop\mame\roms
#--------------------------------------------------------------------------------------------------#
# 0 = default rom list
#
# 1 = use mame xml list
# file catver.ini is optional (must be in the same folder)
#
# 2 = load settings from settings file: [rom_path]\[rom_name].[rom_extension]
#
# 3 = use mame list info (requires DatUtil from http://www.logiqx.com )
# file catver.ini is optional (must be in the same folder)
#
# Settings .ini file structure:
#
# emulator_commandline ...
# emulator_arguments ...
# input_mapping ...
#
# use this for game that needs different settings
# (eg. pc games need to be lauched in different path, so you create one file per game that contains
# exe path in emulator_commandline)
#
list_type 1
#--------------------------------------------------------------------------------------------------#
# multiple rom extension allowed only in default rom list (list_type = 0) and must be comma
# separated
#
rom_extension zip
#--------------------------------------------------------------------------------------------------#
# nms_file must be placed in rom_path
#
# nms_file structure:
#
# [rom_description] | [rom_name]
#
nms_file
#--------------------------------------------------------------------------------------------------#
# it's only used in list creation if emulator_commandline not contains emulator path directly, but,
# for example, a wrapper or a program that launch emulator in second time
#
emulator_path C:\Documents and Settings\Simo\Desktop\mame
#--------------------------------------------------------------------------------------------------#
# HiToText Settings (only for mame):
#
hitotext_exe_path C:\HiToText\HiToText.exe
hiscore_path C:\Documents and Settings\Simo\Desktop\mame\hi
nvram_path C:\Documents and Settings\Simo\Desktop\mame\nvram
#--------------------------------------------------------------------------------------------------#
# ARGUMENTS KEYWORD:
# (allowed in pre_emulator_app_arguments, emulator_arguments and post_emulator_app_arguments)
#
# [rom_path] | [rom_name] | [rom_extension] | [full_path] | [full_dos_path]
#
# [full_path] = [rom_path]\[rom_name].[rom_extension]
# [full_dos_path] = [full_path] in dos format (8.3)
# # = no argument
#
#--------------------------------------------------------------------------------------------------#
# run a process before emulator
#
pre_emulator_app_commandline
pre_emulator_app_arguments
#--------------------------------------------------------------------------------------------------#
# run emulator
#
emulator_commandline C:\Documents and Settings\Simo\Desktop\mame\mameuifx.exe
emulator_arguments [rom_name]
#--------------------------------------------------------------------------------------------------#
# 1 = yes | 0 = no
#
emulator_nodosbox 1
#--------------------------------------------------------------------------------------------------#
# run a process after emulator
#
post_emulator_app_commandline
post_emulator_app_arguments
#--------------------------------------------------------------------------------------------------#
# use this if you want to remap some key (useful for mapping quit combination key)
# eg.:
# ESC::LAlt+X -> remap esc key with combination Left Alt + X
# A::B -> remap A key with B key
#
# multiple settings must be comma separated (eg.: ESC::LAlt+X,A::B).
# See feel.ini for complete key list
# input_mapping not working with emulators that runs with input exclusive mode (like mame)
#
input_mapping
#--------------------------------------------------------------------------------------------------#
# snapshot is also used by screen saver
#
snapshot_path C:\Documents and Settings\Simo\Desktop\mame\snap
video_path C:\Documents and Settings\Simo\Desktop\mame\video
cabinet_path C:\Documents and Settings\Simo\Desktop\mame\cabinets
marquee_path C:\Documents and Settings\Simo\Desktop\mame\marquees
#--------------------------------------------------------------------------------------------------#
# take effect only in the all-games list
#
show_clones 0
#emulator_useshell 0
snapshot_extension png
cabinet_extension png
marquee_extension png
#input_controls joy4way - 1P - 4Bt
current_layout wood
#mess_machine
Non hai i permessi necessari per visualizzare i file allegati in questo messaggio.
-
- Cab-maniaco
- Messaggi: 1646
- Iscritto il: 02/08/2005, 8:40
- Medaglie: 1
- Città: Latina
- Grazie Inviati: 6 volte
- Grazie Ricevuti: 3 volte
Re: [RELEASE] FEEL FRONTEND 1.9
forse non digerisce i percorsi con gli spazi tipo: C:\Documents and Settings\....
Prova a racchiuderli tra doppi apici
Prova a racchiuderli tra doppi apici
-
Simo
- Affezionato
- Messaggi: 193
- Iscritto il: 24/09/2015, 22:13
- Medaglie: 1
- Città: Mantova
- Grazie Inviati: 8 volte
Re: [RELEASE] FEEL FRONTEND 1.9
Virgolettato tutto ma sempre lo stesso errore.
Ma se si preme exit menù quando si è fuori
dal menù , cosa dovrebbe succede, in teoria niente giusto ?
Ma se si preme exit menù quando si è fuori
dal menù , cosa dovrebbe succede, in teoria niente giusto ?
-
dR.pRoDiGy
- Moderatore F.E.E.L.
- Messaggi: 3069
- Iscritto il: 17/11/2009, 15:55
- Medaglie: 1
- Città: Prov_Milano_zona_Sempione
- Grazie Inviati: 10 volte
- Grazie Ricevuti: 17 volte
Re: [RELEASE] FEEL FRONTEND 1.9
Ciao simo,
così a prima vista non c'è nulla di storto nei file che hai allegato.. per assicurarsi che tutto sia ok potresti zippare la directory config e postarla qui?
Premendo il tasto "exit menu" si accede direttamente al menu di uscita, che mostra le varie opzioni esci a windows, shutdown, etc.
Appena possibile mandami lo zip e ci dò un occhio!
così a prima vista non c'è nulla di storto nei file che hai allegato.. per assicurarsi che tutto sia ok potresti zippare la directory config e postarla qui?
Premendo il tasto "exit menu" si accede direttamente al menu di uscita, che mostra le varie opzioni esci a windows, shutdown, etc.
Appena possibile mandami lo zip e ci dò un occhio!
"Non si smette di giocare perché si diventa vecchi, ma si diventa vecchi perché si smette di giocare"
F.E.E.L. - FrontEnd (Emulator Launcher)
http://feelfrontend.altervista.org
https://github.com/dr-prodigy/feel-frontend/
F.E.E.L. - FrontEnd (Emulator Launcher)
http://feelfrontend.altervista.org
https://github.com/dr-prodigy/feel-frontend/
-
Simo
- Affezionato
- Messaggi: 193
- Iscritto il: 24/09/2015, 22:13
- Medaglie: 1
- Città: Mantova
- Grazie Inviati: 8 volte
Re: [RELEASE] FEEL FRONTEND 1.9
Ecco qua
Non hai i permessi necessari per visualizzare i file allegati in questo messaggio.
-
dR.pRoDiGy
- Moderatore F.E.E.L.
- Messaggi: 3069
- Iscritto il: 17/11/2009, 15:55
- Medaglie: 1
- Città: Prov_Milano_zona_Sempione
- Grazie Inviati: 10 volte
- Grazie Ricevuti: 17 volte
Re: [RELEASE] FEEL FRONTEND 1.9
Okkei, bug trovato e fixato.. v.1.9.1.2 disponibile in auto-update
"Non si smette di giocare perché si diventa vecchi, ma si diventa vecchi perché si smette di giocare"
F.E.E.L. - FrontEnd (Emulator Launcher)
http://feelfrontend.altervista.org
https://github.com/dr-prodigy/feel-frontend/
F.E.E.L. - FrontEnd (Emulator Launcher)
http://feelfrontend.altervista.org
https://github.com/dr-prodigy/feel-frontend/
-
Simo
- Affezionato
- Messaggi: 193
- Iscritto il: 24/09/2015, 22:13
- Medaglie: 1
- Città: Mantova
- Grazie Inviati: 8 volte
Re: [RELEASE] FEEL FRONTEND 1.9
dR.pRoDiGy ha scritto:Okkei, bug trovato e fixato.. v.1.9.1.2 disponibile in auto-update
ora funziona alla perfezione
-
- Affezionato
- Messaggi: 116
- Iscritto il: 25/05/2015, 23:15
- Medaglie: 1
- Città: Genova
- Grazie Inviati: 8 volte
- Grazie Ricevuti: 2 volte