Impostazioni mame per modeline

[PaTrYcK]

640x480, nn ti conviene settare un layout a bassa risoluzione?
Non ti da fastidio il flickering?

[PaTrYcK]

Xche' 640x480, meglio un layout con basse risoluzioni, non ti a fastidio il flickering sul front end?

[bisus]

Pochissimo, quindi tu suggerisci di scendere su win a 256 ma anche sull' FE ?

[PaTrYcK]

No no...se ti trovi bene con il flick lascia cosi
Due test
1)avvia testgrid, la cornice rossa combacia con il limite dello schermo?
2)avvia pacman, come si vede? Se posti foto meglio

[bisus]

Finalmente un momento libero
Questo e' pac man

ImageUploadedByTapatalk1353768211.277626.jpg

[bisus]

Questo e' ad esempio wonder boy, non so se si intuisce ma su entrambi i lati ho due barre nere che squadrano lo schermo

ImageUploadedByTapatalk1353768306.473037.jpg

ImageUploadedByTapatalk1353768324.042911.jpg

[PaTrYcK]

Ma quindi il "problema" lo hai sui giochi orizzontali, non sui verticali...pacman e' perfetto
se vai sull'ini di wonder boy (wboy.ini )che risoluzione e' impostata?

[bisus]

Credo sia questo il problema, dentro alla cartella in trovo solo abscam.ini e mame.ini

[PaTrYcK]

Ok, ok puoi ovviare su questo specifico gioco se metti la risoluzione adatta, se invece vuoi avere in automatico tutti gli ini gia' pronti con risoluzione ok dovresti avviare vmmaker.exe, lo hai fatto?

[bisus]

Si l'ho fatto ma sembra non creare gli ini
Lo lancio fa' l'estrazione del mame.xml, importa i video mode, fa' lo store delle modeline nel registro, riavvio e non sono piu' a 15 khz e devo reinstallare i catalyst per tornarci

[PaTrYcK]

Incolla qui il contenuto del vvmaker.ini

[bisus]

; VideoModeMaker - Options
; ------------------------

; 1. MAME
; -------

; Path for Mame executable, in case we want to extract xml information from it.

MameExe = "\mamepc\mame\1 - SUPER MAME XXL\MameUI32.exe"

; Path for Mame ini folder, in case we want to create an ini file for each game.
; Important: existing ini files will be overwritten.

IniPath = "\mamepc\mame\1 - SUPER MAME XXL\ini\"

; Mame options.

ListFromXML = 1 ; Processes Mame XML and get video mode list from it
GenerateXML = 1 ; Extracts XML from Mame (only needed once)
GenerateInis = 0 ; Creates an ini file for each Mame game, in the IniPath folder
SDLMame = 0 ; Use SDLMame specific options

; Monitor orientation

MonitorHorizontal = 1 ; 0 = Rotating monitor: horizontal and vertical games at their native resolution
; Suitable for users that physically rotate their CRTs
; 1 = Horizontal monitor: horizontal games run at their native resolution and
; vertical games are rotated to fit in horizontal monitor

RotatingDesktop = 0 ; Specifies if both desktop and monitor are rotated

; Aspect ratio for vertical games on horizontal monitor
; 4:3 (keeps original aspect ratio)
; 3:3 (stretches to square format)
; 3:4 (stretches to full screen)
; h:v (custom aspect ratio)

VerticalAspect = "4:3"


; 2. MONITOR
; ----------

; Monitor Type. Valid types: D9800, D9400, D9200, EGA, VGA, MULTI, H9110, PAL, NTSC, GENERIC, CUSTOM

MonitorType = "CUSTOM"


; Monitor CUSTOM. These values will be used if MonitorType = "CUSTOM"
;
; monitor_specs_0-6 = "HfreqMin-HfreqMax, VfreqMin,VfreqMax, HFrontPorch, HSyncPulse, HBackPorch, VfrontPorch, VSyncPulse, VBackPorch, HSyncPol, VSyncPol, ActiveLinesLimit, VirtualLinesLimit"
;
; * HfreqMin-HfreqMax: Minimum and maximum horizontal frequency, in Hz. Defines the range of horizontal frequencies the monitor is capable to sync.
; The higher the horizontal frequency, the higher the vertical resolution available for the same vertical refresh.
; The higher the horizontal frequency, the higher the vertical refresh available for the same vertical resolution.
; The higher the horizontal frequency, the lower the horizontal amplitude of active video (narrower picture).
;
; * VFreqMin-VfreqMax: Minimum and maximum vertical frequency, in Hz, Defines the range of vertical frequencies the monitor is capable to sync.
;
; * HFrontPorch, HSyncPulse, HBackPorch: Horizontal timing and geometry, values in µs
;
; * VfrontPorch, VSyncPulse, VBackPorch: Vertical timing and geometry, values in ms
;
; * HSyncPol,VSyncPol: polarities, not in use! defaults to negative.
;
; * ActiveLinesLimit: Vertical resolutions until ActiveLinesLimit value included, are generated as progressive, regardless the possibility
; of obtaining the required vertical refresh value.
;
; * VirtualLinesLimit: Vertical resolutions above ActiveLinesLimit and below VirtualLinesLimit are virtualized, that is, an interlaced resolution
; bigger that the native one is generated, with the right refresh, and "hardware stretch" is applied.
; Vertical resolutions above VirtulaLinesLimit are generated as interlaced, without any stretching.

monitor_specs_0 = "15625-16200, 49.50-65.00, 2.000, 4.700, 8.000, 0.064, 0.160, 1.056, 0, 0, 480, 448"


; Tolerance for horizontal frequency, in kHz, enables extending the range defined by [ HfreqMin, HfreqMax ]
; The resulting allowed frequency range will be [ HfreqMin - HfreqTolerance, HfreqMax + HfreqTolerance ]

HfreqTolerance = 0.010


; 3. MODELINE GENERATOR
; ---------------------

; Total number of modelines to generate. Here are the recommended values for each driver version:
; CRT_Emudriver, based on Catalyst 6.5 XP32: 160 modes (accepts up to 200, but above 160 HyperSpin will refuse to load)
; CRT_Emudriver, based on Catalyst 6.5 XP64: 120 modes
; CRT_Emudriver, based on Catalyst 9.3 XP32/64: 120 modes (accepts some more but above 120 you can get some blue screens)
; Regular Catalyst: 60 modes (won't accept any more)

TotalModes = 120

; Method for mode table generation. If Mame xml is processed, that will create a lot of different video modes, so the mode table
; will be optimized keeping the most relevant ones, and dropping the rest, to keep below the TotalModes value.

ModeTableMethod = 1 ; 0 = Static table: modelines are generated keeping their original vertical refresh. This
; method is intended to be used in combination with ini files for each game.
; 1 = Dynamic table: a table of dummy modes is created using xres and yres values while ignoring
; vfreq. This method is intended to be used in combination with Switchres or Groovymame. No ini
; files are required using this method (you should disable the GenerateInis option).


; Minimum resolution values (these will be used instead of lower values)

XresMin = 184
YresMin = 192

; Minimum dotclock value allowed by the video card, in MHz (i.e. DotClockMin = 7.010)

DotClockMin = 0

; Number of iterations used by the mode generator [0,5]. The higher the number of iterations, the bigger the accuracy of the vertical
; refreshed obtained, normally at the cost of increasing the horizontal frequency strictly required.

Iterations = 0

; Specifies if the refresh label is multiplied by 10 before rounding (experimental).

VFreqLabelx10 = 0

; 4. DRIVER
; ---------

; Path for the driver folder

DriverPath = ".\Driver\"

; If UpdateRegistry is enabled, UpdateDriver will only work if the driver version found in DriverPath matches the one installed
; in the system.

UpdateRegistry = 1 ; Specifies if the video card registry section will be updated with the new video modes
; (will only work in combination with CRT_EMUDriver).

UpdateDriver = 0 ; Specifies if the driver files in DriverPath will be updated with the new video modes, for
; future installations.

AnyCatalyst = 0 ; Allows modelines to be installed for any Catalyst version. This option is experimental and
; known to produce some problems.

[PaTrYcK]

Ok, devi cambiare questo parametro, altrimenti nn ti genera ini:

"GenerateInis = 0 ; Creates an ini file for each Mame game, in the IniPath folder"

setta:
"GenerateInis = 1..."

[bisus]

grande Patryck, sta generando tutte le ini per i giochi vediamo ora che succede : )

[bisus]

ImageUploadedByTapatalk1353780831.787363.jpg

ImageUploadedByTapatalk1353780846.068580.jpg

Ini creato per ogni gioco ma pac man ora e' peggio di prima e wonder boy uguale, che faccio Patryck ? Non so dove sbattere la testa

[PaTrYcK]

ok ora vai su ini di puckman e wboy, vedi le risoluzioni presenti

[bisus]

questo e' l'ini di pac
## pacman ##
## "Pac-Man (Midway)" ##
## pacman ##
screen0 \\.\DISPLAY1
resolution0 400x288@52
hwstretch 0
syncrefresh 0
rotate 1
quello di wonder non lo ha creato

[PaTrYcK]

+ tardi ti dico

[bisus]

Grazie Patryck, c'hai una pazienza

[PaTrYcK]

ok modifica l'ini vvmaker
da:
monitor_specs_0 = "15625-16200, 49.50-65.00, 2.000, 4.700, 8.000, 0.064, 0.160, 1.056, 0, 0, 480, 448"

a:
monitor_specs_0 = "15625-16200, 49.50-65.00, 2.000, 4.700, 8.000, 0.064, 0.160, 1.056, 0, 0, 256, 448"

in pratica cambia ActiveLinesLimit, da 480 a 256 linee, quindi da questo valore in su verra' utilizzata una risoluzione virtualizzata in modo che ci stia perfettamente sul tuo schermo che dovrebbe avere circa 256 linee sul verticale

salva e riavvia vvmaker.exe x rigenerare ini, poi avvia pacman e vedi come va