Approfitto per chiederlo anche io.
Inserisco qui un post di un altro forum se mi è concesso:
The Atomiswave is indeed fully Jamma compliant. It will use all 5 buttons on the Jamma harness so you will need to drill an extra 2 holes per side on your CP in order to account for this setup. The Atomiswave will support low res/CGA/15KHz, via the Jamma harness, and high res/VGA/31Khz, via the VGA socket. The video modes will be selectible via a small pin switch in front of the Atomiswave. Your CGA monitor should be able to output the Atomiswave video with no problems. You will not need any extra wiring unless your Jamma harness does not have wires connected to all of the player botton pins. Here is an example of a fully stuffed Jamma harness.
Your standard 12volt power supply will be more than sufficient to power the Atomiswave. One last thing, while the Atomiswave can support stereo, Jamma does not support this so your sound will be mono. If you want stereo sound, you will either need to mod the console with stereo rca jacks or pruchase the special stereo cable to connect it to the front of the Atomiswave. IMHO, modding the console is better since you can then use regular rca stereo cables to connect your Atomiswave to your sound amp. In fact, I have already performed this mod to my Atomiswave.
Dice pressoché tutto, ho idea che serve una supergun con una modifica per un ulteriore tasto o qualcosa fatto ad hoc sulla base stessa.
Ha l'uscita VGA quindi si puo' anche collegare direttamente ad un monitor per pc... Ma con che cavo?
Con una supergun standard come vengono mappati i tasti sullo stick neo geo? A B C D e quinto tasto su select?
Ed infine, qual'è un prezzo giusto per una AW?
Grazie e scusate la raffica di domande.
