Recallbox e gert666
Moderatore: Moderatore Raspberry
Recallbox e gert666
Ciao a tutti!
Sono nuovo del forum e finalmente mi son deciso anche io a costruirmi un cabinato arcade, o meglio a restaurarlo.
Per il momento sto cercando di far funzionare la parte elettronica prima dell'assemblaggio vero e proprio; sono in attesa dell'arrivo del mio crt da 20'' e al momento sto testando il raspberry con uscita vga su un ben più recente lcd full hd.
Il problema è che il massimo che son riuscito ad ottenere è un "risoluzione non supportata".. ho cercato in giro per il forum ma niente non ne esco fuori (il fatto che io sia totalmente noob in linux non aiuta).
Grazie in anticipo a chi vorrà aiutarmi
Sono nuovo del forum e finalmente mi son deciso anche io a costruirmi un cabinato arcade, o meglio a restaurarlo.
Per il momento sto cercando di far funzionare la parte elettronica prima dell'assemblaggio vero e proprio; sono in attesa dell'arrivo del mio crt da 20'' e al momento sto testando il raspberry con uscita vga su un ben più recente lcd full hd.
Il problema è che il massimo che son riuscito ad ottenere è un "risoluzione non supportata".. ho cercato in giro per il forum ma niente non ne esco fuori (il fatto che io sia totalmente noob in linux non aiuta).
Grazie in anticipo a chi vorrà aiutarmi
Ultima modifica di Pixer il 04/04/2018, 13:07, modificato 1 volta in totale.
- vincenzo.bini
- Affezionato
- Messaggi: 262
- Iscritto il: 22/04/2016, 20:48
- Città: Travagliato
- Grazie Inviati: 2 volte
- Grazie Ricevuti: 5 volte
Re: Recallbox e gert666
Posta il tuo config.txt
Inviato dal mio Redmi Note 4X utilizzando Tapatalk
Inviato dal mio Redmi Note 4X utilizzando Tapatalk
>>>JammaPi<<<
Re: Recallbox e gert666
Allora al momento ho reinstallato recall box per avere il sistema pulito quindi il config è quello di default:
# uncomment if you get no picture on HDMI for a default "safe" mode
#hdmi_safe=1
disable_overscan=1
# uncomment to force a specific HDMI mode (this will force VGA)
#hdmi_group=1
#hdmi_mode=1
# Sound output. Set to 0 or comment for autodetect, 1 for DVI, 2 to force HDMI.
#hdmi_drive=2
# Using /etc/modules is deprecated and no longer supported on 4.4 kernel
# So manually enable audio
dtparam=audio=on
config_hdmi_boost=0
# force hdmi while the tv can take time before sending the signal on the hdmi output
hdmi_force_hotplug=1
# uncomment for composite PAL
#sdtv_mode=2
# uncomment for lirc-rpi
#dtoverlay=lirc-rpi
# if you plug your tv at the same time as your rpi and that the rpi switches from the hdmi or give a low resolution because tv had no enough time to initialize it
boot_delay=3
# uncomment if you don't want the rainbow at startup
disable_splash=1
# default CEC name
cec_osd_name=recalbox
# Overclock
gpu_mem_256=128
gpu_mem_512=256
gpu_mem_1024=512
avoid_safe_mode=1
kernel=zImage
# uncomment if you get no picture on HDMI for a default "safe" mode
#hdmi_safe=1
disable_overscan=1
# uncomment to force a specific HDMI mode (this will force VGA)
#hdmi_group=1
#hdmi_mode=1
# Sound output. Set to 0 or comment for autodetect, 1 for DVI, 2 to force HDMI.
#hdmi_drive=2
# Using /etc/modules is deprecated and no longer supported on 4.4 kernel
# So manually enable audio
dtparam=audio=on
config_hdmi_boost=0
# force hdmi while the tv can take time before sending the signal on the hdmi output
hdmi_force_hotplug=1
# uncomment for composite PAL
#sdtv_mode=2
# uncomment for lirc-rpi
#dtoverlay=lirc-rpi
# if you plug your tv at the same time as your rpi and that the rpi switches from the hdmi or give a low resolution because tv had no enough time to initialize it
boot_delay=3
# uncomment if you don't want the rainbow at startup
disable_splash=1
# default CEC name
cec_osd_name=recalbox
# Overclock
gpu_mem_256=128
gpu_mem_512=256
gpu_mem_1024=512
avoid_safe_mode=1
kernel=zImage
- vincenzo.bini
- Affezionato
- Messaggi: 262
- Iscritto il: 22/04/2016, 20:48
- Città: Travagliato
- Grazie Inviati: 2 volte
- Grazie Ricevuti: 5 volte
Re: Recallbox e gert666
Allora al momento ho preinstallato recall box per avere il sistema pulito quindi il config è quello di default:
# uncomment if you get no picture on HDMI for a default "safe" mode
#hdmi_safe=1
#disable_overscan=1
# uncomment to force a specific HDMI mode (this will force VGA)
#hdmi_group=1
#hdmi_mode=1
# Sound output. Set to 0 or comment for autodetect, 1 for DVI, 2 to force HDMI.
#hdmi_drive=2
# Using /etc/modules is deprecated and no longer supported on 4.4 kernel
# So manually enable audio
dtparam=audio=on
#config_hdmi_boost=0
# force hdmi while the tv can take time before sending the signal on the hdmi output
#hdmi_force_hotplug=1
# uncomment for composite PAL
#sdtv_mode=2
# uncomment for lirc-rpi
#dtoverlay=lirc-rpi
# if you plug your tv at the same time as your rpi and that the rpi switches from the hdmi or give a low resolution because tv had no enough time to initialize it
boot_delay=3
# uncomment if you don't want the rainbow at startup
disable_splash=1
# default CEC name
#cec_osd_name=recalbox
# Overclock
gpu_mem_256=128
gpu_mem_512=256
gpu_mem_1024=512
avoid_safe_mode=1
kernel=zImage
dtoverlay=vga666
enable_dpi_lcd=1
display_default_lcd=1
dpi_group=2
dpi_mode=9
Inviato dal mio Redmi Note 4X utilizzando Tapatalk
# uncomment if you get no picture on HDMI for a default "safe" mode
#hdmi_safe=1
#disable_overscan=1
# uncomment to force a specific HDMI mode (this will force VGA)
#hdmi_group=1
#hdmi_mode=1
# Sound output. Set to 0 or comment for autodetect, 1 for DVI, 2 to force HDMI.
#hdmi_drive=2
# Using /etc/modules is deprecated and no longer supported on 4.4 kernel
# So manually enable audio
dtparam=audio=on
#config_hdmi_boost=0
# force hdmi while the tv can take time before sending the signal on the hdmi output
#hdmi_force_hotplug=1
# uncomment for composite PAL
#sdtv_mode=2
# uncomment for lirc-rpi
#dtoverlay=lirc-rpi
# if you plug your tv at the same time as your rpi and that the rpi switches from the hdmi or give a low resolution because tv had no enough time to initialize it
boot_delay=3
# uncomment if you don't want the rainbow at startup
disable_splash=1
# default CEC name
#cec_osd_name=recalbox
# Overclock
gpu_mem_256=128
gpu_mem_512=256
gpu_mem_1024=512
avoid_safe_mode=1
kernel=zImage
dtoverlay=vga666
enable_dpi_lcd=1
display_default_lcd=1
dpi_group=2
dpi_mode=9
Inviato dal mio Redmi Note 4X utilizzando Tapatalk
>>>JammaPi<<<
- vincenzo.bini
- Affezionato
- Messaggi: 262
- Iscritto il: 22/04/2016, 20:48
- Città: Travagliato
- Grazie Inviati: 2 volte
- Grazie Ricevuti: 5 volte
Re: Recallbox e gert666
Prova cosi...
Inviato dal mio Redmi Note 4X utilizzando Tapatalk
Inviato dal mio Redmi Note 4X utilizzando Tapatalk
>>>JammaPi<<<
Re: Recallbox e gert666
Funziona!!!!
Eppure son convinto di averlo già provato così.. hai aggiunto solo le ultime 5 righe?
Ti ringrazio infinitamente!!!!
Eppure son convinto di averlo già provato così.. hai aggiunto solo le ultime 5 righe?
Ti ringrazio infinitamente!!!!
- vincenzo.bini
- Affezionato
- Messaggi: 262
- Iscritto il: 22/04/2016, 20:48
- Città: Travagliato
- Grazie Inviati: 2 volte
- Grazie Ricevuti: 5 volte
Re: Recallbox e gert666
Non c'è di che!
Ho anche commentato alcuni punti sopra, ma se va, lascia pure così...
Inviato dal mio Redmi Note 4X utilizzando Tapatalk
Ho anche commentato alcuni punti sopra, ma se va, lascia pure così...
Inviato dal mio Redmi Note 4X utilizzando Tapatalk
>>>JammaPi<<<
Re: Recallbox e gert666
Grazie ancora!!! Al max torneró a tormentarti piú avanti!
Almeno adesso posso iniziare a costruirmi il cavo rgb in attesa dell’arrivo del crt!
Almeno adesso posso iniziare a costruirmi il cavo rgb in attesa dell’arrivo del crt!
- vincenzo.bini
- Affezionato
- Messaggi: 262
- Iscritto il: 22/04/2016, 20:48
- Città: Travagliato
- Grazie Inviati: 2 volte
- Grazie Ricevuti: 5 volte
Re: Recallbox e gert666
Ottimo, siamo sempre qui!Pixer ha scritto:Grazie ancora!!! Al max torneró a tormentarti piú avanti!
Almeno adesso posso iniziare a costruirmi il cavo rgb in attesa dell’arrivo del crt!
Inviato dal mio Redmi Note 4X utilizzando Tapatalk
>>>JammaPi<<<